About

Location

islamabad


About Me:

A beginner drone maker, looking for suggestions and newer ideas to improve my skills and abilities


Please tell us a bit about your UAV interest

I first started developing interest in drones from a youtube video, continuing this path, I have came to the point of building my first drone.


Hometown:

xyz


Activity Feed

hassaan posted a discussion
I just saw a video, recommending to use 4 s batteries instead of 3 s for quad-copters. And then lowering throttle end points from the RC remote, to lower the power being delivered to the motors. Now, I`ve got 12 volt motors and a 14.8 volt battery.…
Jun 27, 2019
hassaan posted a discussion
Hi there everyone. So I have motors for my quadcopter, that are rated for 12 Volts. The battery that I have available is 14.8 Volts. Is there anyway way to bring down this voltage to approximately 12 Volts level (as required by the motors), by…
Jun 26, 2019
hassaan posted a discussion
Hi there everyone. I have a 2205 2500 KV brush less motor for my quadcopter, that requires 12 V for operation. The batteries available are either 3S (11.1 V) or a 4S (14.8 V). Which battery should I use with this motor considering the above…
Jun 24, 2019
hassaan replied to hassaan's discussion ESC and FC for quadcopter drone
"thank you so much. This helped a lot. Ronald Pandolfi said:
There are many ESCs to choose from, and nearly all will be fine for a first time builder. Select an ESC of appropriate voltage and amperage that operates on BlHeli Firmware and has an easy…"
Jun 22, 2019
hassaan posted a discussion
Hi there everyone. I am a beginner builder, and am in the phase of building my first drone. So I have selected the  frame, motors and prop. But I am confused with the Esc and the flight controller.This is the link to the Esc I want to…
Jun 22, 2019
hassaan replied to hassaan's discussion Brushless DC motor specfications table
"Wow, this was such a lifesaver, thanks. Thomas Butler said:
From third grade, the "X" means multiply! This is a 2760 revolutions per volt motor.
For LiPo batteries,  the "X" is the number of cells in the battery.  For the LiPo, "X3" is three cells;…"
Jun 21, 2019
hassaan posted a discussion
Hi there everyone. Referring to the last column (load type) of the table below, showing a specifications table of a DYS Samguk series WEI 2207 (2300kV) brushless motor, I am confused with the letters X3 and X4 written alongside battery/prop. What do…
Jun 11, 2019