Gender
Male
About
About Me:
rc enthousiast
Please tell us a bit about your UAV interest
yrs
Activity Feed
"joo, i found the problem! :)
all my engines (stock engines and esc's) from the Naza Flamewheel s-550 had problems with the esc connectors.
the trick was, i put a drop of soldeer on the tip of the engine connectors and now the problems are…"
all my engines (stock engines and esc's) from the Naza Flamewheel s-550 had problems with the esc connectors.
the trick was, i put a drop of soldeer on the tip of the engine connectors and now the problems are…"
"today i tried again, stabilize mode, acro mode, auto mode.
all with motor hiccups, and the auto mode with no help from me.
In the logs where no input spikes, but still hiccups with an (random) engine :("
all with motor hiccups, and the auto mode with no help from me.
In the logs where no input spikes, but still hiccups with an (random) engine :("
I'm flying a DJI Flamewheel 550 with a APM 2.0, it's flying very nice. and using the DJI esc's and engines.Sometimes in flight one engine is quitting the job. Only for half a second and then back to work.Just enough time to recover :) The hardware…
"YES! it's flying ok now :)
After several pid tweaks, i flashed the firmware, erased the eeprom, reset to factory default. Now it's flying normal ..
Strange ......"
After several pid tweaks, i flashed the firmware, erased the eeprom, reset to factory default. Now it's flying normal ..
Strange ......"
"Hmm, i doubled the distance of the APM to the groundplate, tweaked around with the yaw params but the problem stays the same. In roll and pitch it's stable, but the yaw swings from right to left, and back .. Everytime the movement is stronger, after…"
I experience strange behavior with my heading hold.The quad rotates cw and back the whole time, but no steady heading hold.It rotates all over the place.I'm using an APM2 with the latest firmware.I tried several times to calibrate the magnetometer,…
"i'm running the latest version 2.7.1, i have the stock frame, with stock motors (920Kv), with 10" props .."
Hi,I'm flying a APM2 on a DJI 550 frame, but a can't get it as stable as the naza controller.Does somebody have the pids for the dji 550 frame?thanks
