"Short update: http://github.com/lilvinz/OpenPilot is good to go on quanton board. It is based on OpenPilot master branch from 2012/10/28. I will try to find time this weekend to update it to the latest OpenPilot release and provide binaries.
"I think FOSS is JTAG only and does not support SWD but i am not sure about that. The cheapest SWD adapters i know are the STM32 Discovery boards from ST. They all embed an ST Link SWD adapter.
I will double check on the old OP based code if it is…"
"You are right, there used to be binaries on my github page but github removed the downloads sections. https://github.com/blog/1302-goodbye-uploads
Besides that, it wont be as easy as flashing another .opfw file onto the board.
E.g. you would have to…"
"The bad system config means that your configuration permits something that could fail in flight.
The most time i get this is when there are flight modes configured but the according modules are not active.
currently the OpenPilot firmware is not in the state to properly support quanton.
On my github page you can find an OpenPilot port with binaries for quanton but
it does not make use of most of the sensors. When OpenPilot catches up i might…"
I am proud to have the opportunity to announce hardware availability of a new target for TauLabs.quanton flight control rev. 1 <-- shop site (on stock, worldwide shipping) System information and components:STM32F405 32bit arm cortex-m4 cpu with fpu,…