Gender
Male
About
Location
Andhra Pradesh
About Me:
I am a trainee aircraft engineer in Hyderabad,India. I have been working on RC aircrafts from quite a long time.
Please tell us a bit about your UAV interest
I have been involved in designing my own amateur UAV since i have been associated with a UAV project, with the government of India. I have assembled a DIY Drones Arducopter lately, trying to develop skills to develop better UAV's.
Hometown:
Hyderabad, India.
Activity Feed
"Hi all,
i wanted to share the following information.
1.The arducopter is setup in + configuration.
2. We are using T9CHP Tx in standard Mode 2 Configuration with throttle stick on the left along with rudder and right stick controls elevator and…"
i wanted to share the following information.
1.The arducopter is setup in + configuration.
2. We are using T9CHP Tx in standard Mode 2 Configuration with throttle stick on the left along with rudder and right stick controls elevator and…"
Dear all,This mail is with regard to the problem we faced during the configuration of the arducopter. I will explain you the details,and would be pleased if you can let me know any possible solution.We have finished all the calibrations in the…
Hi all, I have just assembled an arducopter 2.0. with an X configuration.It flips off in one direction during takeoff. I am using a 4 cell lipo and all the props are working fine and ESC's are callibrated. I have run all the suggestions in the…
