"the red LED on my apm 1 not lit and the entire flight was so late. try to return home and not work. why not lit the red light? has passed several times"
"someone can tell me about the apm when no red led. today went out to fly and not a moment's rekindled, still flew well but did not fix the tail. Later I now turn my apm and the red LED turned on. I need to know that did not light the red LED that is…"
"now flying my AMP 1 with firmware 2.6 but did not last a minute in the air. I need to know if they can review the log and tell me what happened. I appreciate the help I can give. is urgent2012-06-20 19-11-33.tlog"
"I made my update 2.6 on APM1 and when I connect I get the mission planner with errors and not be switched. I can help what happens.
this is what comes.
Mavlink 1.0 heartbeat, please upgrade your mission planner this planner is for mavlink 0.9"
"inquadrare un abbraccio e saluti dalla Colombia.Ho avuto qualche problema con la mia apm 1 ed è il dispositivo che a volte perde il controllo e cade. quello che è successo ieri realizzata avendo visto in mano è che in ogni momento in cui egli teneva…"
"Please can you help me. I was flying my quadcopter and hold position when you turn the team went to ground. these are the last two log. I appreciateprompt help.
2012-05-16%2018-12-25.tlog"
"hello hello hug.I can help with anything, I did several plannings flight with tri and firmware 2.0.49 and flew very well.I did a quad and install 2.5.4 program a waypoint flight and the team took off like crazy.WP PIDs are by default and does not…"
"norman muchas gracias por tu respuesta, si me ayudaría mucho saber como hago que funcionen esos speed, pues te cuento que los tengo trabajando en un quad con board crius multiwii y trabajan súper.
ahora he visto una función en estos equipos que se…"
"can somebody explain how to program or activate flight mode in mikrocopter calledfree care in multiwii head free, not as it teeth in arducopter, but if I would like to know how does the programming sa to keep the orientation in this mode. thank you…"
"Marco.... know if you can work with ultra pwm speed as they work from 200 to 1200.and be able to change the code to use? ... I'm asking because I have a plate alsomultiwii and that some codes were changed and you can use that speed, thanks"