Getting six fly modes on Futaba T10CAG transmitter

We use for example CH5,switch C-3positions and switch D-2positions.

Settings:

1. Transmitter END POINT menu-GEAR -100%

2.SUB-TRIM menu-GEAR -0

3.AUX-CH SELECT menu –CH5-Ls1(Logical switch)

4.LOGIC SW menu.Settings as shown on left.

5.PROG.MIX1-8 menu choose mix 5

6.P.MIX5 page 2/2 settings as shown

7.GYRO SENSE menu settings-CH5 and switch C as shown.

8.GYRO SENSE menu position 2 to ON.

9.C switch up,D switch up and set 68%.Pulse with in this set is 1166µs.

10.C switch middle position,D switch up and set 48%.PW-1264µs.

11.C switch down,D switch up and set 16%.PW-1423µs.

12.P.MIX5 menu tab2/2 turn MIX ON.

13.P.MIX5 tab1/2 C switch down,D switch down and set -(minus)71% at poin5.PW-1554µs.

14.C switch middle,D switch down,set -(minus)76% at point1.PW-1683µs.

15.C switch up,D switch down and set -(minus)71% at point5.PW-1814µs

16.Now P.MIX tab2/2

That's all.There are other ways to do it,no doubt.

You need to be a member of diydrones to add comments!

Kelvin Dadhania January 14, 2012 at 8:18pm

Nice work....thanx a lot
Developer

Adam Rivera January 13, 2012 at 10:35am

Nice! Thanks for posting!
Jason Wise January 13, 2012 at 3:57am

Shucks I just gotta say, genius work!, Ive been scratching my head with using the same radio, you made it look easy!
Clark Hymas January 12, 2012 at 10:24pm

Is the futaba 8FG similar or is there anyone who has instructions for the 8FG?
3D Robotics

Chris Anderson January 12, 2012 at 4:14pm

Excellent, many thanks! I've added this to the manual here.

of 3

This reply was deleted.