Comments

• Randy Ram October 30, 2013 at 9:57am

  Which module are you using for the xbee? If you go to the site where you bought it, there is usually a link for the drivers.
• 

  valentin colon October 30, 2013 at 9:11am

  I need to comunicate the xbee with my andoid device cant find any driver any help?
• 

  Neuro October 30, 2013 at 8:34am

  My first build almost all the bugs iron out Still waiting on my GPS and Power Module. I DUB THE "HOBBYKING SPECIAL!"

  HKpilot Mega 2.5
  HK Q450 frame
  Q-brain 25 amp esc
  3dr radio Telem module
  Turnigy multistar 2213 -935 Kv motors
  10- 4.5 props
  Zippy 4500 Mah compact Lipos "12-15" min flight time
  HK batter monitor "may be faulty" lol
  springy landing struts !!
  
  Turnigy 9x radio system "stock"
• Aku Duan October 21, 2013 at 10:14pm

  hye!im new here!and im new in multirotor.im using the hexacopter and hope we can share alot of information here!thank you!
• 

  mark October 20, 2013 at 7:52am

  Interesting interview with Chris Anderson
• Rob J October 17, 2013 at 11:08am

  @Hillary

  I share your thoughts...each time I find a site like this, I go into major absorb mode.
• hillary October 16, 2013 at 11:31pm

  new here,so happy
• Admin

  Thomas J Coyle III October 16, 2013 at 9:36am

  @Rob,

  Ardu may be a shortening of the word Arduino and used to indicate that the original Ardupilot used an Arduino Atmel processor, the 168/328.

  Regards,

  TCIII ArduRover2 Developer
• Developer

  Adam Rivera October 16, 2013 at 9:36am

  @Rob J: Stands for Arduino, the family of boards that ArduCopter runs on. See: http://arduino.cc/
• Rob J October 16, 2013 at 9:32am

  Is Ardu an acronym?  I feel it must be, but can't find anything to explain it.  I just know I'll be sorry for asking this.