Comments

• Clyde Fussell July 9, 2011 at 7:17am

  Can someone tell me the procedure to enable channels 5-8 out of the APM? I am not up on codeing as I should be, but am willing to figure it out. My transmitter is sending channels 5-8 to the APM, but no output to the servos from the AOM. I would like to use these channels for flaps and camera control.

  Thanks
• Jaime Curry July 2, 2011 at 7:27am

  I could also help with translation to Spanish, as well as Nosepo.
• 

  Nosepo June 22, 2011 at 11:05am

  Hello. 

   

  I will contribute with a translation in Spanish.

  Please any Dec Team can guide me for make this??

   

  Thanks.
• 

  Ritchie June 13, 2011 at 4:03am

  I am currently flying an APM that is carved open, beaten, twisted, crushed and has as many add-ons as I can fit. While I continue to develop my parts, sensors and such I am also attempting to get a quad built (for faster testing really) and a custom airframe that will hold not just the normal home UAV things but something a lot more special.

  I'm enthusiastic builder and programmer but my flying sucks which is why I like APM :D
• Developer

  Mark Colwell June 6, 2011 at 7:01am

  I have integrated Remzibi OSD, Camera Stabilization & Tracking, and added uBlox DIFF_GPS and DOP to library, I have flown original AP with ArduIMU 1.5 (My 1.0 unit upgraded to 2.0 with AirSpeed Sensor & Mag Compass  in a StevensAero SportStick and a Stryker II.  

  I have several platforms in progress for APM 2.

  SkyWalker stretched to 100", The New HK AS-21 with popup motor, 2, Piper L-4 Grasshoppers a 1830mm with Monster Power 32 motor  and 2300mm version with Tacon 160 motor  (both are very big inside the 2300 version is really huge, could carry a WiFi repeater with ease.

  I update each official; release with all my changes, now current with APM 2.12 

  I think it is ready for flight test as I have run it many hours on the bench, last test was 200.000 data points for 48 hrs with no issues. 
• Developer

  Doug Weibel June 5, 2011 at 2:05pm

  I am the guy primarily responsible for taking the code from ArduPilot 2.7 to ArduPilotMega 2.2, and beyond hopefully.   I am currently flying APM in a SkyFun, a SkyWalker, and a Senior Telemaster.  I have also flown it in a NexStar MiniEP, so I have some experience with different platforms.  I am using QGroundControl and HK-GCS and starting to look at the GCS functionality in the new APMPlanner.
• Admin

  Thomas J Coyle III May 27, 2011 at 8:08pm

  I have yet to actually fly my APM in one of my TSIIs and in my Maja. I have several Ardupilots that I plan to fly in my EZ*s also. The weather here in North TX has not be cooperating with me, at least when I am at home and not at work. However, I have learned a lot about what to do and what not to do by visiting the Forum every day and taking note of useful informantion.

  Regards,

  TCIII