Comments

• 

  Adam Warburton March 12, 2015 at 2:14am

  Can't wait to try out a set of RFD900+'s!
• 

  Adam Warburton March 12, 2015 at 2:13am

  The 915mhz used by these radios is 100% because it falls under frequency hopping. Totally different than standard 915Mhz band (ie 915Mhz cannot be used for FPV while it is fine for a frequency hopping data link). Can link the regulation article for reference if anyone wants clarification.
• keiran o'shea March 12, 2015 at 1:49am

  Anyone interested in another sydney meetup? FPV racing ?
• 

  Justin L March 12, 2015 at 1:24am

  Yeah use the 3dr 915 on the iris+ and the rfd900 on my planes both work really well.
• 

  Adam Warburton March 12, 2015 at 12:49am

  915 is the way to go. You can only legally use 433 up to about 25mw but 915 in these types of frequency hopping radios can be used up to 1W without a license. The 3DR radios are only 100mw but it means you can use it at full power without worry.
• Dani March 12, 2015 at 12:16am

  Hello everyone, 

  I'm planning on ordering the Iris+. What frequency do I need to choose? 915 MHz or the 433 MHz?

  Thanks. 
• 

  Chris Podesta February 11, 2015 at 1:14am

  Hi All,  selling m 3DR 2014 X8,  its done about 3 hrs since new if that. It has FPV kit,  3 Lipos, gimble.  Its listed here on gum tree.

  http://www.gumtree.com.au/s-ad/hobart-cbd/other-electronics-compute...
• 

  Peter Lucas December 18, 2014 at 2:31pm

  Hi Everybody

  I just want to put it out there to the members in WA that I am available to help , assist & build UAS , This will help me to improve my skills and produce a better product for the future.thanks , Look on my profile for contact details

   
• 

  Nicholas Witham July 29, 2014 at 7:41pm

  Does anybody know of any UAS manufacturers in Australia, preferably WA.
  
  We are looking for a company to build us a UAS (multirotor/groundstation etc.) that will give us the capability to do mapping/photogrammetry, and remote inspections in the mining and construction industry.
  
  We are a small start up at the moment, so a modest budget is what we have to start with right now, so we were thinking about something like a tarot hex frame, with big props/motors, and pixhawk as the flight controller.
  
  Personally I have experience in building/flying/crashing quads over the last 2 years, and I could definitely build this platform myself, but we want a professional looking system to represent our professional outfit.
  
  We are currently going through the certification process, and would expect to be complete by the end of this year, so training on a new system is required in the very near future.
  
  Please PM me with details.
  Nicholas
• 

  Jesus July 5, 2014 at 1:43am

  Hello, 

  My name is Jesús from Spain, I´m not in Australia yet but I´m going to go for Phd stay at the Sydney University at the ACFL for two months in august . And i I want to contact with the UAV community there. 

    Thanks :-)

    Jesús