Comments

• 

  Paul Dinardi October 30, 2014 at 11:14am

  Pull up Google Earth, draw a line from where you last saw it to your last known auto mission. Search from where you last saw it, towards your last auto mission keeping in mind it could be in a tree. Take your telemetry and tablet or phone with you, if it had a full charge and it's sitting in a tree, is a good possibility, the battery could be sending telemetry. The tablet with show the paper airplane icon at iris' s location. Sorry for your loss.
• 3D Robotics

  Vu Tran October 22, 2014 at 1:42pm

  Hi Glenn,
  I'm really sorry to hear that.  Do you have telemetry logs?  Can you open up a ticket so we can help review what happened?  Please send your logs to help@3drobotics.com  We'll do all we can to help!
• John O'Shaughnessy September 3, 2014 at 11:34am

  Just a note to people commenting on the IRIS group "wall."  The wall is not a great place to put something if you expect a reply, as there is no threading.  Instead, use the option to "Add a Discussion."  This will create a note thread that can be easily responded to.  Here's a direct link: http://diydrones.com/group/iris/forum

  To be honest, I've been looking at the Discussions for months, and didn't even see this Comment Wall, as it fall below my normal screen full of data.  If the admins had a way to disable the comment wall, I think more discussion topics would be created, and this would be a stronger community.

  John
• armen t September 2, 2014 at 11:26pm

  hi are there any plans for an IRIS+?

  any future upgrade plans?
• 

  Paul Dinardi September 1, 2014 at 6:42am

  Question on Mission Planner and Iris Fail Safe.

  In Mission Planner, I see that there are a few fail safe settings, but I'm interested in the setting for Ground station Loss, FS_GCS_ENABLE, would this also include transmitter loss? I know that the value of 2 continues the mission, but I'm not certain if that also includes transmitter signal loss.

  With an older drone that I use with Qground control, the default setting is to continue the mission,  because this drone used wifi, (I assume because wifi range was so small), I'm fairly certain that the flight paths I take would still have signal, but there are several trees involved and I don't want to chance having to climb them to retrieve Iris. 

  Any help would be appreciated. 
• Roberto Andrade July 24, 2014 at 9:58am

  Iris RC control display, no work

  Please display my RC does not work and does not allow me to arm the iris. 
  
  I've tried changing the battery and did not work 
  
  someone has happened something?
• Murat April 9, 2014 at 10:20am

  https://www.youtube.com/watch?v=Kl_4WxZ9u1w

  12 mins with a 4S 3000mah battery

  YouTube
• Murat April 2, 2014 at 9:36am

  Have anyone experienced this on IRIS?

  Circle radius 0 (panorama) rate at 72, IRIS stops circling every 3-4 turns and does a 1/4 circle opposite direction as if it's trying to correct something.

  I don't get this at slower rates like 18 or 36.

  See video (sorry for the flip)

  http://youtu.be/qQvPGzDaeS0
• 

  Ken Fayal March 23, 2014 at 3:14am

  http://youtu.be/k89J_IEMp2s
• 

  Dr. Pete March 13, 2014 at 2:07pm

  I tried the procedure described here to bind one of the remote receivers from an AR10000 Rx with my Dx8 and Dx9, however I failed to find the "Click on Bind in QGroundControl". Spent a few hours digging through the scattered documentation, and reloaded the Pixhawk firmware. Gave up and reconnected the FrSky Rx.

  Then spent several hours trying to fix the horizontal leveling to the Tarot Gimbla. That was an interesting exercise.

  The FrSky may has some technical advantages, but the transmitter feels like what it is;a value-engineered product Completely Handassembled In North America (CHINA). It just doesn't feel or balance like the Spectrum. I fly with a neck strap and pinch the sticks. A thumb flyer may feel differently.