I see there are the eagle files on the product page for the APM 2.0 purple, so I was wondering if it was possible to use those to have the pcb's made? It says "Not recommended for production, for reference only" Is there somewhere where I can get t
What kind of functionality do I get with just the GPS and APM? I know I can't do auto land without sonar, but what else can I do or can't do with this setup?
So after my first major crash with one motor cutting out for some reason and my quad ending up smashed and breaking two motors I'm thinking about a Y six configuration. My main question is if one of the motors gives out will the redundancy in motors
I did 3 flights with my quad this morning and the first flight went flawlessly. On the second one, the quad suddenly yawed about 45 degrees really fast to the left. I thought it was the wind or a fluke, so I brought it down (with a hard landing) th
I have only used my quad as a hobby and for fun. However, I was at the farmer's market last night and got to talking to a farmer there about my quadcopter. He told me how it would be a useful tool to be able to take videos and pictures of his crop
So I accidentally posted this in the wrong forum earlier. Anyways, I thought I would share that I had some very good flights today. No crashes, quad was stable and handled very well. I am getting the hang of flying now and feel pretty comfortable.
I'm trying to calibrate my radio in the CLI, however, when I type radio in the setup mode it just outputs "Radio Setup:" I hit enter on the keyboard and it does nothing. I can't type anything so I just have to close the CLI window to get out of it.
AC 2.023, no sonar, no magnetometer, Mediatek GPS.
So I got a carbon fiber version of the HK Quad frame, and I set up everything, loaded the AC 2.023 from the Arduino program not the APM Planner as I have a Mac. The only settings I changed was from
I'm on AC2 with APM, IMU, GPS, no magnetometer, and using Turnigy 9x tx and rx. I verified all motors are spinning in correct direction and followed the set up to a T. I'm using the x orientation and flying in stabilize mode. Anyways, so when I incre
I've searched and searched, but haven't been able to find a good solution. I'm using the Turnigy 9x Tx and Rx and I've messed with the settings to try and get the 3 position switch (F.Mode) to work to switch the modes. But I can't assign it in to the
I got my quad set up using ArdupiratesNG code and did the configurator tool, I followed all the directions. I'm also using the Turnigy 9x transmitter and receiver. When I arm the motors, they start spinning even with the throttle all the way down..is
When I connect aircraft and everything, everything works in Manual mode. When I switch it over to fly by wire or stabilize I cannot move the aileron, throttle, or elevator in either mode with the transmitter. My understanding that I would be able t