About Me:
Eng.
About
Please tell us a bit about your UAV interest
Very much interest.
Hometown:
Turkey
Activity Feed
"Problem still continue...
Any suggestion on this issue?
Thanks in advance."
Any suggestion on this issue?
Thanks in advance."
Hi,I am trying to modify and download the APM Copter code by using Arduino IDE as a first time.APM 2.5 with ArduCopter 3.2.1 Firmware was used in my trial.After downloading Arducopter code set into the board by using Arduino IDE, I am getting the…
"Hi Guys,
I am trying to set up mavproxy with a raspberry pi 2+ pixhawk using the instructions here:
http://dev.ardupilot.com/wiki/raspberry-pi-via-mavlink/#Testing_the...
I'm up to the "testing the connection" step,
the pixhawk does not seem to…"
I am trying to set up mavproxy with a raspberry pi 2+ pixhawk using the instructions here:
http://dev.ardupilot.com/wiki/raspberry-pi-via-mavlink/#Testing_the...
I'm up to the "testing the connection" step,
the pixhawk does not seem to…"
Hi all,I am a new bee and trying to learn the mathematical model of the airplane to calibrate the control parameters correctly. As a first step, I have started with the yaw control due to its easy test without the need of flying. When I investigated…
"Hi Talha,
Thanks for your suggestion. I have already planned to try Octave, Sage, Scilab or FreeMat. However, I don't know which one supports APM kind of hardware. Do you have any idea about the programs supporting APM hardware?
Thanks and Regards."
Thanks for your suggestion. I have already planned to try Octave, Sage, Scilab or FreeMat. However, I don't know which one supports APM kind of hardware. Do you have any idea about the programs supporting APM hardware?
Thanks and Regards."
Hi everbody,I want to connect APM with an open source program, which is similar to MATLAB. Could you please suggest some open source programs with the similar functionalities of MATLAB? Can you also suggest the entegration procedures of APM to those…
