Gender
Male
About
Location
Corona, CA
About Me:
Intermediate fixed wing RC pilot. Flying several fixed wing planes with APM 2.6. Have flown many fully autonomous missions.
Please tell us a bit about your UAV interest
I'm intrigued by the technology.
Hometown:
Temescal Valley, CA
Activity Feed
"Dieter Preiser said:
I'm setting up a new fixed wing model and, due to wiring constraints, need to orient the external GPS with compass with arrow backwards. The APM2.8 is in its normal orientation. On a previous install, my GPS/compass was…"
I'm setting up a new fixed wing model and, due to wiring constraints, need to orient the external GPS with compass with arrow backwards. The APM2.8 is in its normal orientation. On a previous install, my GPS/compass was…"
"I'm setting up a new fixed wing model and, due to wiring constraints, need to orient the external GPS with compass with arrow backwards. The APM2.8 is in its normal orientation. On a previous install, my GPS/compass was oriented with arrows toward…"
"Apparently Mission Planner 1.3.41 does not support GeoFencing. You have to upgrade to MP 1.3.41 BETA version."
"Here is my screen shot. I have set my return point as well as min and max fence altitudes.
NotSupported.gif"
NotSupported.gif"
"Justin,
Did you ever get your issue resolved.
I'm getting the same message when trying to upload my geofence to APM2.8 running ArduPlane 3.4.0. I have Geofence enabled, home point set as well as max and min altitudes."
Did you ever get your issue resolved.
I'm getting the same message when trying to upload my geofence to APM2.8 running ArduPlane 3.4.0. I have Geofence enabled, home point set as well as max and min altitudes."
"I am running ArduPlane 3.4.0 with a APM 2.8 and have the same issue. Did you ever get it resolved?"
I'm flying a Eachine 250 Racer with APM 3.1 Mini, Orange R615X Receiver, and Bluetooth Module. I've had several good autonomous missions, but noticed that sometimes while in Auto mode, the mode changes from Auto to Land and then back to Auto…
"Mine flies just fine with stock pid settings. I'm able to do auto takeoff and landing without an air speed indicator. If there is a bit of wind I may have to nudge the airplane a bit on autolanding. "
"Did you ever put that APM in your EDF? I'm eager to find out how it worked out for you."
"I have a similar situation, except that I have ailerons, but no rudder. Any suggestions on how to make this work? I'm only interested in getting autoleveling and stabilization. My preferred mode of operations is fly by wire or stabilize. I do not…"
