Location
Nsw
About
About Me:
Fly rc for fun
Please tell us a bit about your UAV interest
1st time apm user trying to work it out
Hometown:
Shellharbour
Activity Feed
Hi we flew a survey grid today during some testing of our fixed wing uav. we are using pixhawk fc with sony a6000 with ir trigger.Mision was flown at 120m and speed set to 60kph. winds were around the 20-30 kph mark and we could see it was a litle…
"I am also very interested in v2. how is it going?"
"Hi Mike
without hooking up to my multi I cant see the full parameter list, there is a parameter that needs to be set to 0 for machine to land.
try the find function look for rtl or land or alt. should come up
hope that helps."
without hooking up to my multi I cant see the full parameter list, there is a parameter that needs to be set to 0 for machine to land.
try the find function look for rtl or land or alt. should come up
hope that helps."
"starting to think its a hardware issue
worked for about 4-5 restarts with relay_pin mapped to aux5 but ir trigger was plugged into aux 2. weird.
why would it work after resetting firmware then not. aaaarrrggghh"
worked for about 4-5 restarts with relay_pin mapped to aux5 but ir trigger was plugged into aux 2. weird.
why would it work after resetting firmware then not. aaaarrrggghh"
"I have launched and recoverd from a small boat, apm 2.5 3.1.5 copter was fine but gimbal was very hard to get going almost gave up then it came alive"
HiThis is killing me seriouslyTrying to figure it out for 3 daysthis is for a hex so running 3.2.1 is the planIf I load firmware plane copter whatever and set the cam trig parameters, I can trigger the camera no problem as long as I don't depower…
