Gender
Male
About
Location
Pretoria
About Me:
RD developer in telecomms industry
Please tell us a bit about your UAV interest
Interested in the use of UAV for data acquisition purposes
Hometown:
Pretoria
Activity Feed
Hi guys,I'm interested in utilizing the Serial output NMEA functionality in Mission planner to receive and log raw GPS data. I want to use this approach because we're using RTK GPS, and I want to log additional accuracy estimation data, which is not…
"No replies????"
Hi, I've started working with a storm32 gimbal controller board... all the documentation is awesome by the way... but struggling with the IMU board section of the setup procedure. All the wiki pages and videos I looked at for the Storm32 board show…
"Hi guys,
As mentioned by the other people, the camera "hot shoe" approach mentioned here sounds really good, and would like to implement it... Something like RTK GPS would not really be that great if it isn't represented in the photo's geo-coding.…"
As mentioned by the other people, the camera "hot shoe" approach mentioned here sounds really good, and would like to implement it... Something like RTK GPS would not really be that great if it isn't represented in the photo's geo-coding.…"
"Just to give you guys an update on my struggle / learning curve... It is some sort of AlexMos / SimpleBGC driver board supplied with that gimbal, but definitely beginning to think that it's some sort of clone from them. The reason I say this is:
I…"
I…"
"Thanks for the suggestions guys! I don't like to spam forums, but it's nice if someone is able to help you out.
Paul beat me to the reply. I actually saw the terminal tab within 3dr interface after a while (which I didn't know of before) and gave it…"
Paul beat me to the reply. I actually saw the terminal tab within 3dr interface after a while (which I didn't know of before) and gave it…"
"Jip, I've got that part thanks. The problem was with entering config mode on the modem with '+++'. Anyway, think Hyperterminal added new line characters, so switched over to Termite.
I now get into config mode, but can't manage to retrieve or set…"
I now get into config mode, but can't manage to retrieve or set…"
"Sooo... this is just fabulous... :(
My 868 config started as such, with RFD config tool v1.6 (before uploading firmware):
and then settings after uploading multipoint firmware:
So the new firmware is on, with factory default settings loaded. And…"
My 868 config started as such, with RFD config tool v1.6 (before uploading firmware):
and then settings after uploading multipoint firmware:
So the new firmware is on, with factory default settings loaded. And…"
"Guys, are you sure this is the best approach to set your gimbals' PIDs? I'm just thinking out loud, but there's WAY TOO much variables constituting to your gimbal's performance, never mind a person's personal preference to set a gimbal less / more…"
"Hi guys, wow this thread is huge!
I don't know if it has already been mentioned on the previous pages, but I need some help with my RFD868+ links please. I bought two pairs of links from RFDesign (the other pair being RFD900+), but it seems that all…"
I don't know if it has already been mentioned on the previous pages, but I need some help with my RFD868+ links please. I bought two pairs of links from RFDesign (the other pair being RFD900+), but it seems that all…"
"hey Dmitriy, thanks for the reply, but that's not exactly what I'm looking for. That's just how to enable a RTK system on Pixhawk and send correction data through the same comms link with GPS injection.
I'm looking for the necessary flight path…"
I'm looking for the necessary flight path…"
"Thanks for the replies. Yes, I eventually got hold of the controller software... Once I knew to start googling for "SimpleBGC" gimbal stuff. I got all the links to do PID setup, firmware reversals etc. Still working through all the content, but it…"
Hi, Has anyone worked with the Storm Pro-3 universal gimbal yet, as advertised here? If so, can anyone please point me in the right direction where they did the necessary config for the gimbal? I presumed that the gimbal controller board is a…
Hi Guys, I think this is a very basic question, but still couldn't get a solid guide line from google or the forum till thus far. From what I can gather, Pixhawk auto-pilots use extended kalman filters to accurately determine its position &…
