Gender
Male
About
Location
Warsaw, Mazowieckie
About Me:
Trying to make own quadro x X copter based mainly on CH6dm AHRS
Please tell us a bit about your UAV interest
I am fascinated in quadrocopter mech simplicity and want to make one to watch for animals around my summer house.
Hometown:
Warsaw
Activity Feed
"This is VERY easy using Taranis radio, but shall also be no problem with any high grade TX..."
"AFAIK, only by making own "mixer" inside the code.
This would not be a big problem using mixers in RC transmitter, but there is no direct possibility from APM level."
This would not be a big problem using mixers in RC transmitter, but there is no direct possibility from APM level."
Hello,After some reading that overpowered X5 are difficult to manage, I decided to put there 200W, 1300kV motor and 7x4,5 folding prop.But it doesn't want to rise at launch... I've tried wing (frisbie like) launch and also took the risk to overhead…
"Have you looked at RVJet ? It already have pan-tilt buil inside..."
"Reffering to first answer just below:
As far as I know just the opposite (almost) and the antennas supplied with my "exact clone" radios are simply short fragments of wire. The range is ca 20m :)) . Maybe with 3DR originals its different case....…"
As far as I know just the opposite (almost) and the antennas supplied with my "exact clone" radios are simply short fragments of wire. The range is ca 20m :)) . Maybe with 3DR originals its different case....…"
"Ok, found and prefetched. Now waiting for week-end to test in the country....
Thanks!"
Thanks!"
Hello,How to load own maps to Mission planner ? In my village area, there are quite good gmaps photos available, but Mission planner tells "there is no imagery for this resolution", even though they are present in google... Other map sources give…
