Gender
Male
About
Location
Ile de France
About Me:
I'm a french mechanical engineer, loving technical stuff and playing around with alost everything.
Please tell us a bit about your UAV interest
I quite new to drones but I like coding and playing with robots.
Hometown:
Montreuil
Activity Feed
"Hi Craig,
Thanks a lot for your quick answer.
It solved my problem. I should have searched deeper into the problem...
Thanks again ! "
Thanks a lot for your quick answer.
It solved my problem. I should have searched deeper into the problem...
Thanks again ! "
Hi, I've just updated to the latest mission planner (version 1.3.42) and i was surprised to discover that the there is no more access to the "Full Parameters List". I was kind of used to this list and it appears that some of the parameters aren't…
Hi, I've noticed that when I extract the waypoints in the tlog file and then load them in the MissionPlanner/flightPlan they are slightly different then the waypoints i wrote.For example, i wrote a single waypoint (see written_waypoint.jpg) and…
"Thank you Michael for your answer. It is indeed wat I feared. I think I'll will have to be patient and wait for version 3.4
Michael Burmeister said:
The wiki page is ahead of the version that is currently available. In version 3.4 there are…"
Michael Burmeister said:
The wiki page is ahead of the version that is currently available. In version 3.4 there are…"
"Thanks James for this link, I'll have a look at this forum. James said:
Try reposting here: http://discuss.ardupilot.org/c/arducopter"
Try reposting here: http://discuss.ardupilot.org/c/arducopter"
Hi to all, I was going through the Complete Parameters List on the arducopter wiki page and there are some interesting parameters listed that I'm not able to find in the Mission Planner Full Parameters List (Mission Planner --> ConfigTuning/Full…
"Coming back with an update:
I tried to do more or less the same using the auto mode. I configured a waypoint (LOITER_TIME 10 seconds) with an altitude of 0. This is supposed to bring the drone to the desired waypoint on the altitude the auto mode…"
I tried to do more or less the same using the auto mode. I configured a waypoint (LOITER_TIME 10 seconds) with an altitude of 0. This is supposed to bring the drone to the desired waypoint on the altitude the auto mode…"
"Thanks again !
I'm going to see if it's somewhere in the telemetry message or if there is a way to put it there.
I really appreciated your help.
Have a nice day.
Stephen Dade said:
Switching from stabilize to loiter the APM will query the GPS…"
I'm going to see if it's somewhere in the telemetry message or if there is a way to put it there.
I really appreciated your help.
Have a nice day.
Stephen Dade said:
Switching from stabilize to loiter the APM will query the GPS…"
"Hi Stephen,
Thanks for your quick reply and for the link.
From what I understand, if I switch from stabilize to loiter, the APM will wait between 0 and 20 ms for new GPS coordinates and then it will try to maintain its position around those…"
Thanks for your quick reply and for the link.
From what I understand, if I switch from stabilize to loiter, the APM will wait between 0 and 20 ms for new GPS coordinates and then it will try to maintain its position around those…"
Hi, I've been following this forum for a while and it has been helping me out a lot ! I am trying to get a better understanding of the pixhawk algorithms and was wondering if one of you could tell me "when" the pixhawk updates its GPS position lock…
