I might have connected the battery of the controller in a reverse way.
So immediately, 1-2 seconds later, I could smell burning smell and see white smoke.
After that, the controller didn't work. Couldn't power it on.
What should I do?
(1) Is there any way that I can fix the controller?
(2) Or can I send it to flysky and ask "paid-repair" ? or is there any company doing this repair?
(3) Or as a last resort, if I have to order a new controller, is it possilbe to replace only the controller without ordering IRIS+ as one set? (Because I heard it needs "pairing" between copter and controller.)
Thank you so much.
Replies
Hi, I did the same and was able to fix it. You will need to buy few electronics components and to replace them. Also you will need to fix burned copper paths. Here is a thread about it in RCGroups, which helped me a lot. I got help there and posted what I did some long time ago. I still use my fixed Turnigy 9x. "Repair Your Fried Turnigy/Flysky/Eurgle 9x Radio (aka Reverse Polarity and You)": http://www.rcgroups.com/forums/showthread.php?t=1415356
I thnk you can buy the FS-TH 9X Motherboard and replace the burned one
Jaewoong,
See RCMODELREVIEWS.COM for youtube video TURNIGY 9X AFTER BATTERY REVERSAL
Good luck,
Joe Homer
I'm sorry to have bad news. But i did the exact same thing a few months ago. Really stupid how I did it but that's another time. To answer your question. There is nothing you can do. I kept mine in case I can have it fixed but no luck yet. Sorry for your loss. Suck it up as learning an expensive lesson an order \ buy another, so you can fly. I know it hurts- Gonna be about $225ish. I'm sure if you search you can get one discounted. Try the shops you've been dealing with. See if they have a demo that's laying around. They may need to make room for Christmas???? I lucked out and found a used rtf pkg I was able to get for just a bit more than just a controller. So I jumped on it. Still kicking myself, though. AAARRRGGG! But I check every connnectuon, every time now. Could've been worse.
Hello, there is a possible fix for your problem, https://www.youtube.com/watch?v=CzACtvFRyvY, its a cheap fix and if you can able to find a electronics repair shop i guess they will probably fix it for you.
This is the cheapest http://www.hobbyking.com/hobbyking/store/__51442__Turnigy_9XR_PRO_R...
You could buy a Taranis by FrSky which is really good.
@Bill The Taranis is not only good, it's excellent ;)
Thank you for sharing your precious experience.
It's nice to know I can replace the controller without replacing the whole IRIS+ set.