Comments

• 

  Bernt Christian Egeland August 22, 2018 at 12:33am

  If anyone wants to fly LTE, then check out my latest build, UAVcast-Pro
  You are ready in 15min, no linux skills required.
  
  https://uavmatrix.com/uavcast-pro/ 
  
  Cheers
  //Bernt Christian Egeland

  

  UAVcast-Pro

  Mobile LTE 4G / 5G BVLOS Drone software for Raspberry Pi. Use multiple devices (IPAD - Smartphone - PC) to manage your drone. Live Telemetry and HD V…
• 

  Andrei March 6, 2018 at 12:54am

  For the Internet of Drones, for which the communication is based on the mobile network, please check this group https://diydrones.com/group/droneroute-the-internet-of-drones-platform

  Shortly, the DroneRoute platform, owns features as telemetry, remote control, realtime visualization of the drones on the map, obstacles positions sharing, alerts for potential colisions, change the routes on the fly, rtk messages for centimeter level positioning, and others.

  The DroneRoute platform can be viewed also as a segment of the IoT network, which targets low power consumption and extended range. For this dedixated standards are being used LTE Cat M1/NB1

  

  DroneRoute - The Internet of Drones platform

  This group is created for the discussions related to the Internet of Drones platform, which we called DroneRoute
• 

  Sven Hoffmann March 5, 2018 at 12:30pm

  Had a very long off-time, but now i´ll be back. Maybe u interested in what we did till 2016 about FPV and R/C via Cellular. Hope my RePost is ok....

  https://diydrones.com/profiles/blogs/fpv-r-c-over-multiple-public-c...

  Right now we´ll preparing for upcoming spring. Hope we´ll hit some benchmarks ;)

  

  FPV & R/C over multiple public cellular networks

  back on street on minute 22:00 ;) Today i´d tried the first high speed tests on public streets with our rover. Time was good cause the streets were e…
• 

  CliffN June 22, 2017 at 8:58pm

  is this still updated? would want to know more especially how to run off multiwii
• 

  Volta Robots April 12, 2016 at 5:20pm

  4Gmetry 4 is coming, stay tuned on http://www.voltarobots.com
• 

  Ronald Pandolfi April 4, 2016 at 4:54pm

  One of the time consuming tasks when integrating a Raspberry Pi or other SBC into a drone is making the power cable. Kashmir World Foundation has some great micro USB to DuPont power cables. You can get one by e-mail: info@kashmirworldfoundation.org
• Moderator

  Bill Piedra January 14, 2016 at 7:25am

  You would need a different telemetry cable - like this one:

  https://store.3dr.com/products/telemetry-slash-osd-y-cable-adapter-...

  
• 

  Volta Robots January 12, 2016 at 6:57pm

  NEW 2016 - 4Gmetry III - turnkey 4G telemetry over 4G, just plug&play.
  

  

  Volta 4Gmetry | Companion Computer
• Darius Jack October 31, 2015 at 12:58pm

  Are you sure FAA has ever approved 2G/3G/4G telemetry in case of recreational drones ?

  Parcel delivery is easy job.

  2G/3G/4G telemetry is not reliable at all in case of drones.

  Direct radio link between control station/pilot and the drone is the Basic Rule.

  2/3/4G telemetry can come as add-on only, since in case

  2/3/4G signal is lost, telemetry is lost and drone operator is starting to  violate standards set by FAA.

  I have developed 3G modem to 3G modem- peer2peer

  direct communication technology (dynamic IP assigned on both sides) without the need to run dynamic DNS server.

  And this technology has now patent pending status.
• 

  Keith M September 2, 2015 at 9:58pm

  It's a safety parameter to switch into manual mode just in case it starts to fly away. You can take off the failsafe for loss of radio link, although this is a drastic measure and I wouldn't recommend it. What products are you using