Gender
Male
About
Please tell us a bit about your UAV interest
Quads, quads and more quads!
Hometown:
Canberra
Activity Feed
"Z axis vibrations! I've had a look at your log, and they're really bad. They should be between -5 and -15. From this log they're between +20 and -30.
Your X and Y vibrations aren't too good either. Have a look at balancing your props and giving…"
Your X and Y vibrations aren't too good either. Have a look at balancing your props and giving…"
"Also, have a read of the Common Problems section of the following page:
http://copter.ardupilot.com/wiki/flying-arducopter/flight-modes/alt..."
http://copter.ardupilot.com/wiki/flying-arducopter/flight-modes/alt..."
"Looked at the logs. Your Z axis vibrations are pretty bad! Looks like you're flying in Alt Hold which requires the vibrations to be minimal. Z vibes need to be between -5 and -15. Yours are between 0 and -40 in some places.
Lots of Z can cause fast…"
Lots of Z can cause fast…"
"Haven't had a chance to look at the log, but could this be transational lift? I have a 450 quad that climbs rapidly when travelling horizontally at high speed. I have to compensate by lowering the throttle. "
I have a Q450 frame with MT2213-935KV motors and 8" props running APM 3.1.5I'm having trouble tuning the thing and I was looking for some advice. I've been through the standard APM tuning guide, and for the most part the quad is flying pretty…
Hi all, First post, be gentle :)I have a q450 (Flamewheel) running an APM 2.7.2 Micro and I'm having trouble with Alt Hold mode. The quad won't stay at a given alt. It will 'bounce' around the place, sometimes coming down to ground level and other…
