"thanks mark. I can't disclose very detailed process on the cage yet, but basically it's just a light weight and crash resistance cylinder. Two bearings are mounted on its bases which allow the shafts extended from the body can rotate freely with…"
"well, this quadrotor was not going to be used solely inside the cage. We use it very often for other types of expriments as well. In those circumstances the safety structure shown in picture above is used to protect propellers, but the structure…"
In this Post the manufacturing process of the Quadrotor used on the HyTAQ is illustrated. In case you have not seen the video of this system here is the link: HyTAQStructural parts of this miniature quadrotor has been fabricated using the shape…
I have problem getting the APM1 to work arfter uploading the firmware through ardino sotfware. I download the Arducopter2.7.3 and follow the right steps in arduino software, the code is compiled and uploaded without any problem. But the APM does not…
"thanks for posting this Paul.
The main idea is using the downward force, obtained by driving the propellers in reverse, to to move the legs. Also, to get the legs off ground SMA wires has been used. "
"This is one of toys I have designed lately as a part of my graduate project.
I have submitted that to Boca Bearing innovation contest, you liked it, vote for it here:
Hi everybody, I have just started using the APM on my own platform. I have two sets of The motors and ESCs. One from Hacker and the other from Castle creation.The ESC from castle are fine. but when I connect the APM to the platform with Hacker ESCs…