Gender
Male
About
About Me:
Active member of the dutch RC community. Busy with several projects, like a nano FPV drone (http://www.modelbouwforum.nl/forums/multicopters/173687-bt-nano-fpv-drone-ladybird.html) and a cheap FPV goggle (http://www.modelbouwforum.nl/forums/fpv-first-person-view/173672-bt-goggles-100-euro-fpv-set.html)
Please tell us a bit about your UAV interest
Main interest is FPV, soon buying the APM for my glider or quadcopter
Hometown:
Berkel en Rodenrijs
Activity Feed
"Hi guys,
A friend of mine tried the APM for the first time and used autotune. During the tuning process he crashed. I was not there, but by looking at the logs I notice a few things.
The first axes (roll) went fine, then it switched to the second…"
A friend of mine tried the APM for the first time and used autotune. During the tuning process he crashed. I was not there, but by looking at the logs I notice a few things.
The first axes (roll) went fine, then it switched to the second…"
"I've also asked on the rcgroups hitec forum, but the trainer port solution is not possible :( Think it's time for a taranis tx.
http://www.rcgroups.com/forums/showthread.php?t=1755755#post24977364
"
http://www.rcgroups.com/forums/showthread.php?t=1755755#post24977364
"
"Or maybe replace 2 switches with something that can be connected to a diy headtracker?
On the sensor subject: I am interested in a vario, as Im gonna use the APM in a glider. Would it be possible to let the A9 beep based on the APM barometer (here…"
On the sensor subject: I am interested in a vario, as Im gonna use the APM in a glider. Would it be possible to let the A9 beep based on the APM barometer (here…"
"Would it be possible to feed 2 channels (for example 1 & 2) from the headtracking to the trainer port and add it to the other channels? I could set up my controls on channel 3-9."
"Anyone with spare arms able to check if the holes are correct on the original dxf?
@Yves, you got a message/friend request"
@Yves, you got a message/friend request"
"Another question: will you be able to modify the A9 to support head tracking? Many people are requesting it but it looks like HITEC is focussing on the new A9X, you would be a hero ;-)"
"Thanks for the offer. I will consider it once I have the APM.
Do you have any pictures of how to connect it up and the size of the board?"
Do you have any pictures of how to connect it up and the size of the board?"
"Cool, just ordered an APM, would also like to have something like this for my A9 :)"
"Yves, are you willing to cut a glassfiber frame for me? I'm looking for the centerplates that Oyvind made with the holes for an APM (original dxf). We are neighbours ;-) (Holland)"
"Is this still true with the current dxf?
EDIT:
The top outside hols for the arms are ~0.5mm off, I think so chek it before cuting."
EDIT:
The top outside hols for the arms are ~0.5mm off, I think so chek it before cuting."
"And do you guys know a place to CNC it? jdrones does not respond, but maybe its still labour day."
"Which thickness fiberglass plate did you use?"
"Thanks for sharing! But I think the center plate points to the wrong file? (ESC_Legs_3.skp)"
"Love the modification Oyvind Amundsen made, I want one :)"
