Gender
Male
About
About Me:
Fixed wing Aerial Survey pilot and UAV controller.
Please tell us a bit about your UAV interest
UAV Controller in Australia
Hometown:
Brisbane
Activity Feed
"Jacques
I remember reading this a few weeks ago from someone who was having a similar problem, and wonder if it could be the same or a similar issue?
http://flitetest.com/articles/pixhawk-fbw-a-autotune-lethargic-reso..."
I remember reading this a few weeks ago from someone who was having a similar problem, and wonder if it could be the same or a similar issue?
http://flitetest.com/articles/pixhawk-fbw-a-autotune-lethargic-reso..."
"Hi Artem,
There was a new parameter created called GPS_RXM_RAW in both plane and copter which should do all of the "configuration" of the GPS to allow the logging of the raw data. Tridge did find a small problem with it though so it wasn't quite…"
There was a new parameter created called GPS_RXM_RAW in both plane and copter which should do all of the "configuration" of the GPS to allow the logging of the raw data. Tridge did find a small problem with it though so it wasn't quite…"
Hi Everyone.I have a .log file from a UBLOX Neo-6P which is logging the Raw RXM data to the Pixhawk log file at 1hz.The question I have now is what is the easiest way to convert this to a Rinex format? RTKLIB obviously doesn't recognize the file or…
"Michael, just another couple of questions if I may as I still seem to be getting some problems geo-referencing
From the tutorial on geo-tagging images -
http://copter.ardupilot.com/wiki/common-geotagging-images-with-miss...
So lets say for example…"
From the tutorial on geo-tagging images -
http://copter.ardupilot.com/wiki/common-geotagging-images-with-miss...
So lets say for example…"
"Thanks Michael.
In that case it appears that I have calculated the offset incorrectly from the camera. I'll try it again and see what result I get."
In that case it appears that I have calculated the offset incorrectly from the camera. I'll try it again and see what result I get."
Hi,I'm hoping someone can answer a couple of questions regarding the geo referencing function of mission planner. I have a fairly large dataset of some vertical imagery taken recently which I'm having trouble accurately geo tagging.The main reason…
Hi Everyone,I'm wondering if anyone has had success with a 1, 2 or 3 axis Gimbal in an X8.I've looked at and have the flatmap gimbal, which is brilliant, but I would like something that will fit an A7 camera and lens where possible. There are people…
"@Patrick! You legend. That additional exclamation point caused the problems. Working on this end now. Thanks again."
"@ Patrick and anyone else who has this working... Which version of Gstreamer on the windows machine did you use for the windows install?
I'm onto the 3rd Windows machine having the same problem, in that I can get one frame into MP HUD but then it…"
I'm onto the 3rd Windows machine having the same problem, in that I can get one frame into MP HUD but then it…"
"@Patrick
Some progress tonight!! So I can now load a stream on the Pc, just not in the mission planner window using these strings.
On the Pi - raspivid -n -t 0 -rot 270 -w 960 -h 720 -fps 30 -b 6000000 -o - | gst-launch-1.0 -e -vvvv fdsrc !…"
Some progress tonight!! So I can now load a stream on the Pc, just not in the mission planner window using these strings.
On the Pi - raspivid -n -t 0 -rot 270 -w 960 -h 720 -fps 30 -b 6000000 -o - | gst-launch-1.0 -e -vvvv fdsrc !…"
"@ Patrick, just turned on the Gstreamer debugging. Went through all the levels, started at 6 (Too much information to catch anything) and stepped it down. Getting this error at levels 4-1. Make any sense?
From mission planner console - Command to…"
From mission planner console - Command to…"
"Morning Patrick.
Thanks for this
I tried both of those pipelines, one in the command prompt, and the second one in the HUD. Same problem again. It's strange as I could get the stream in a pop up window two days ago but now that won't even come up.…"
Thanks for this
I tried both of those pipelines, one in the command prompt, and the second one in the HUD. Same problem again. It's strange as I could get the stream in a pop up window two days ago but now that won't even come up.…"
"@Patrick, Great setup and and walk through. I seem to be having the same problem as Ratfeet. It seems the pipeline is pushing from the Pi through to the windows machine, but I'm getting a freeze frame in the mission planner HUD rather than streaming…"
"May have identified the problem, and could be quite a silly thing from my end. Flying an X8 (flying wing) and left the PID's as default after reading some other threads which said the X8 flew well with the default PID's. Of course this means there…"
Hi,First post here so if this is in the incorrect place please let me know :)I'm flying a Skywalker X8 using the pixhawk autopilot and running mission planner as a GCS. Apart from the obvious problems such as hand launching, one thing that seems to…
