Gender
Male
About
Location
South Australia
Please tell us a bit about your UAV interest
Using APM2 for rover and UAV Bilxer
Hometown:
Adelaide
Activity Feed
"I'm pretty sure I set those variables but it does hurt to check and reload"
"Chris: I'll try one of the older versions to see if i get the same result"
"Chris: Mine is connected RC CH5 (3 position sw) to APM2 IN5, if i connect to APM2 IN8 i get no change in mode."
"Hi Chris,
I had brown out problems to start with, I have isolated the power supplies running a seperate battery and BEC to the input and receiver. Ive got to the point of isolating the positive/power from the ESC to the APM2 output positive rail.…"
I had brown out problems to start with, I have isolated the power supplies running a seperate battery and BEC to the input and receiver. Ive got to the point of isolating the positive/power from the ESC to the APM2 output positive rail.…"
"Hi All,
Some help and input please
I have loaded on the latest version of APMrover on my APM2. The trouble im having is that the mode switch is not working on input 8. I have found that the input switch is working on input 5, but when i go to auto…"
Some help and input please
I have loaded on the latest version of APMrover on my APM2. The trouble im having is that the mode switch is not working on input 8. I have found that the input switch is working on input 5, but when i go to auto…"
"Hi All,
Im in Adelaide Australia and I would like to be in for a kit but with an option to buy the heavier equipment locally if possiable as the freight costs will probably defeat the purpose of going DIY.
I will check the freight prices as it…"
Im in Adelaide Australia and I would like to be in for a kit but with an option to buy the heavier equipment locally if possiable as the freight costs will probably defeat the purpose of going DIY.
I will check the freight prices as it…"
