About

Gender

Male


Location

Bowling Green, KY


Please tell us a bit about your UAV interest

Just starting. Seems like a very cool hobby!


Activity Feed

Clinton Mills posted a discussion
So I have been flying my HexaCopter for a little while now and wanted to try out some of the flight planning stuff in Mission Planner. I have the full wireless telemetry and in Mission Planner built a few way points and clicked 'Write WPs' button.…
Apr 28, 2013
Clinton Mills posted a discussion
So I just got done putting together my first HexaCopter and it will not take off.Here are the current parts:Motors are 1200kv (http://www.hobbyking.com/hobbyking/store/__25084__NTM_Prop_Drive_Se...)7x6E…
Mar 3, 2013
Clinton Mills posted a discussion
I am just about done putting together a Hexacopter using my own parts. I have connected all of the BEC to the Output of the ArduPilot like mentioned in the APM2 Motor Order…
Feb 27, 2013
Clinton Mills replied to Clinton Mills's discussion Hitec Optima 9 Receiver to Ardu
"Also I bought the 915Mhz (US) Telemetry set. Is there a way to use the  Aurora 9 Controller to see that information? If so any documentation on that would be very helpful!
Thanks"
Jan 30, 2013
Clinton Mills replied to Clinton Mills's discussion Hitec Optima 9 Receiver to Ardu
"Thank you Gary very much for taking the time to reply. I am embarrassed to say that Yes I was asking about the wiring. I did read through the Wikis and it seems tailored to the KITS you can buy. The information you gave is exactly what I needed. I…"
Jan 30, 2013
Clinton Mills posted a discussion
I am trying to hook my Hitec Optima 9 Receiver that came with my Aurora 9 Controller to Ardu (APM 2.5). I looked through the 'Connecting your RC input and motor' documentation and it seems tailored for the pre-made kits. Is there documentation that…
Jan 29, 2013
Clinton Mills posted a discussion
I am new to the Multicopters world and have spent a few weeks just researching the different types of Multicopters and what type would best interest me (RTF, ARF, KIT, Build my own). After doing the research I wanted to try and build my own (I know…
Jan 20, 2013