About

Gender

Male


Location

Aberdeen


About Me:

I am a Graduate Civil and Structural Engineer working in the Subsea industry.


Please tell us a bit about your UAV interest

Trying to build a UAV that can be launched from a weather balloon and fly home safely. My goal for this is summer 2013 Just bought the APM 2.5


Hometown:

Aberdeen


Activity Feed

Connor commented on Arthur Benemann's blog post [Update] DroidPlanner v0.14.2
"Hi Arthur,
 
Cheers for the update. I agree with Ricardo, if DroidPlanner could control the antenna tracker that would be amazing. I would be happy to help fund your ground station by giving you $50 towards it if you could look into it. 
 
If anyone…"
Sep 3, 2013
Connor posted a discussion
Hello,I finally managed to save up enough to upgraded to 2.5 and on my first test flight with it yesterday on RTL mode it flew over head for a bit and then took off. I followed it for a few km but lost it.No idea how to put up the telemetry logs for…
Feb 10, 2013
Connor left a comment for Michael Oborne
"Thanks for all your help with the joystick control of the APM1. I have managed to get the new 2.6 code to compile using the IDE and i have edited out the "trim_radio();" you said to but i have no idea what to do with the 
 
RC1_MIN = 1000
RC1_MAX =…"
Sep 4, 2012
Connor commented on Andrew Tridgell's blog post Getting the most out of your APM1280
"Worked. Thank you for that. "
Sep 4, 2012
Connor commented on Andrew Tridgell's blog post Getting the most out of your APM1280
"Cheers for that. I am looking at another post as I am trying to set up my APM to fly with an xbox controller and no other RC gear. Cheers for all the help"
Sep 4, 2012
Connor commented on Andrew Tridgell's blog post Getting the most out of your APM1280
"I'm using the Arduplane. I have changed the GPS Protocol from auto to MKT16 and it took me down from 700+ bytes to 300+ bytes.

I have looked at the 2.5 code and by changing the GPS setting it will fit on the board but the 2.6 wont"
Sep 4, 2012
Connor commented on Andrew Tridgell's blog post Getting the most out of your APM1280
"I think i have disabled everything i can find on this post but the IDE is still telling me i am "region text overflowed by 342 bytes" any idea what else i can disable or might have missed?"
Sep 4, 2012
Connor replied to Connor's discussion APM Planner Help
"I have managed to get it compiling now but i'm getting this error message.     "avr/bin/ld.exe: region text overflowed by 724 bytes"  I'm guessing that sketch is two big so going to see what all can be deleted. once i have uploaded my modified code…"
Sep 4, 2012
Connor replied to Connor's discussion APM Planner Help
"when ever i try to compile the code i keep getting an error "   AP_Int16 format_version;" it wont run past this line any ideas?"
Sep 4, 2012
Connor replied to Connor's discussion APM Planner Help
"Ok cheers for that. Was just hoping that there might be a way of getting the mission planner to update and use my new code. Cheers for the help "
Sep 4, 2012
Connor posted a discussion
Hello,Its been a year since I flew my plane and I'm making a few changes. Mostly I want to be able to fly the plane just using an xbox controller. I have read this post and even asked a few Qs but I'm still stuck. The Mission planner will download…
Sep 4, 2012
Connor replied to Kabir's discussion Joystick control of ArduPlane not working
"Monroe,
Thanks for all the help, I'll buy all the bits this week and report back in a next weekend to see if the setup works :-)"
Sep 2, 2012
Connor replied to Kabir's discussion Joystick control of ArduPlane not working
"Monroe,
Thanks for the quick reply. I'm getting rid of my rc and I am going to try to get 10km from the 3DR radio's i seen somewhere that they have already got 7.6km+
If I reduce the telemetry refresh will this slow down the tracking on my Antenna…"
Sep 2, 2012
Connor replied to Kabir's discussion Joystick control of ArduPlane not working
"Is this the correct way to set up the APM 1 for joystick control only? My RC isn't great anymore and i would like to swap over to just using the joystick but didn't know how to do it.
Do you just edit the code in the arduino interface?"
Sep 2, 2012
Connor left a comment for jaron
"Hello
I was wondering if you could help me. I am trying to control my Arduino Mega with an Xbee, the same as you have.
I need help connecting the Xbee to the Arduino so that it acts like a normal serial connection; I have searched the net and can’t…"
Nov 7, 2009
Connor left a comment for jaron
"Hello
I was wondering if you have got 2 way communication between you pc and Arduino Mega working, and if so how? I have been looking on the internet for a way of controling my arduino and geting some data sent back at the same time but i can't find…"
Oct 28, 2009
More…