Gender
Male
About
Location
No State Selected
Please tell us a bit about your UAV interest
UAV's for Agriculture, in VIS and NIR cameras
Hometown:
Kochav - Yair
Activity Feed
"@g I have uploaded, via Wetransfer, an Ortho of Cows. Pls. check"
"@Shoshana Ginsburg. Pls. see the attached from Solvi. The input is Geotiff Ortho from drone images. What can you supply for cow counting ?Solvi-Count-Cows.jpg"
"DAVE BEHR said:
@William Shalar, Thx. I would appriciate if you can do some modifications for Cow counting. My input is a Geotiff Orthomosaic, or the input is a set of RGB still images (Nadir) from a drone. I will performing it shortly. If you will…"
@William Shalar, Thx. I would appriciate if you can do some modifications for Cow counting. My input is a Geotiff Orthomosaic, or the input is a set of RGB still images (Nadir) from a drone. I will performing it shortly. If you will…"
"@William Shalar, Thx. I would appriciate if you can do some modifications for Cow counting. My input is a Geotiff Orthomosaic, or the input is a set of RGB still images (Nadir) from a drone. I will performing it shortly. If you will send your email,…"
"DAVE BEHR said:
Hi Agriavionics, Do you have an Application for counting Cattle from an Orthoimage (Geotiff ) generated from drone images flying over a field with cattle? Do you have an example ? Thx. Agriavionics said:
Hi everyone I am in the…"
Hi Agriavionics, Do you have an Application for counting Cattle from an Orthoimage (Geotiff ) generated from drone images flying over a field with cattle? Do you have an example ? Thx. Agriavionics said:
Hi everyone I am in the…"
"Agriavionics said:
Hi everyone I am in the process of working on an application that can initially stitch georeferenced images and then analyse these images for various uses like counting crops or counting headcount of animals...and crop health..I…"
Hi everyone I am in the process of working on an application that can initially stitch georeferenced images and then analyse these images for various uses like counting crops or counting headcount of animals...and crop health..I…"
"Hi, What about a programable water spraying mechanism ?"
"If using Photoscan, they have a Fisheye removal. Or use the Ptlense (fairly cheap). I ordered the MOBIUS from http://publiclab.org, . They ship only towards end of March."
"Hi John,
Which spectrum does your modified Mobius have ? and which bands ?"
Which spectrum does your modified Mobius have ? and which bands ?"
"Hi John,
Nice results !
Which Software are you using for NDVI calculations ? Which NDVI formuals used ? From which cameras were the images of the attachment taken ? which altitude/speed flown ? In you offer - which camera and software do you supply…"
Nice results !
Which Software are you using for NDVI calculations ? Which NDVI formuals used ? From which cameras were the images of the attachment taken ? which altitude/speed flown ? In you offer - which camera and software do you supply…"
"Hi Gus,
Thanks , I am looking for a Windows Editor in order to pull out stills from the video.
Dave"
Thanks , I am looking for a Windows Editor in order to pull out stills from the video.
Dave"
"Hello Gus,
I read your recent article in "Rotor Drone", Summer 2014, pg. 88.
It is a good and informative article !
I have a Phantom 2 with Gopro 3+ Black, and have questions regarding setup:.
You wrote that still images can be obtained from the…"
I read your recent article in "Rotor Drone", Summer 2014, pg. 88.
It is a good and informative article !
I have a Phantom 2 with Gopro 3+ Black, and have questions regarding setup:.
You wrote that still images can be obtained from the…"
"Yes - i know this link - but MAXMAX has added some special macros for NDVI
David"
David"
"Deon
I also have for the SX260 the firmware (for intervolemeter timing) - will it be the same for the SX100 - so don't have to purchase another set of firmware ?
David"
I also have for the SX260 the firmware (for intervolemeter timing) - will it be the same for the SX100 - so don't have to purchase another set of firmware ?
David"
"Deon,
Thanks for the through reply,
I have AgpIxel and Agisoft.
Is the Canon SX100-Converted from MAXMAX (Dan) ?
How is it compared with the SX260 converted from MAXMAX ?
Which plane are you using ? I have a Skywalker - will the Sony NEX-5 fit into…"
Thanks for the through reply,
I have AgpIxel and Agisoft.
Is the Canon SX100-Converted from MAXMAX (Dan) ?
How is it compared with the SX260 converted from MAXMAX ?
Which plane are you using ? I have a Skywalker - will the Sony NEX-5 fit into…"
