Please tell us a bit about your UAV interest
qarducopters
About
Activity Feed
I have thishttp://www.getfpv.com/lumenier-ce-720-effio-v-720tvl-super-wdr-camera.htmland thishttp://www.hobbyking.com/hobbyking/store/__77815__Lawmate_1_2GHz_8CH_1000mW_Wireless_AV_Transmitter_for_FPV_CCTV_Camera.html The cables that came with them…
"the receiver is powered via the APM 2.6 with JP1 removed. The ESC BEC is connected to this side of the apm board.
The APM is powered via the 3dr power module."
The APM is powered via the 3dr power module."
"Tridge, thanks for looking at this.
I can 100% say that step 2 was not as a result of turning on the transmitter.
Now i dont know if i trust my setup anymore or if this is a one-off error that will never happen again....."
I can 100% say that step 2 was not as a result of turning on the transmitter.
Now i dont know if i trust my setup anymore or if this is a one-off error that will never happen again....."
"Tridge,
Thanks for the response.
Do you have any idea as to the answer to question 1?
By the way i am using an ezuhf system and a taranis radio."
Thanks for the response.
Do you have any idea as to the answer to question 1?
By the way i am using an ezuhf system and a taranis radio."
I attempted a mission.Arduplane is set to continue on tranmitter failsafe. After takeoff I turned off the transmitter. I had a telemetry connection. I have flown many flights in the hard config of this plane so i am very positive that the video is…
Hi,Was this ever sorted ?http://diydrones.com/forum/topics/continue-mission-on-signal-loss?g... did a flight today and had both values in the firmware…
I am planning a mission. The landing point is not the same location as the takeoff point.How can i calculate the distance of my mission ? (Mission planner automatically appears to draw a return to start point as a waypoint - so the distance does not…
Hello,does a 1.3 ghz hd transmitter reciever combination exist that is suitable for an rc plane. I have a standard 1.3 ghz setup but i would love better video quality coming back to a screen.
"Brilliant. Thanks for the help"
i am going to setup auto-takeoff for the first time. I dont know the location. can i just setup any mission at any location on mission planner with the first point being auto take off and then use that mission ?from reading the documentaion the…
"got this sorted - my transmitter power wasnt working when i tested."
Hello,i have my av out from my receiver plugged into the AV IN/OUT of the fatshark dominator HD and have the receiver turned off. I am still not getting an image. Is there something else i need to do ?I have referenced this but there is little/no…
"Would fbwb work?"
"hi,
so do you setup a flight switch as takeoff and just throw it ? "
so do you setup a flight switch as takeoff and just throw it ? "
"Can you describe in detail how you launch?"
hello,i find it tough enough to take off my finwing penguin. Its balanced and i takeoff in manual. usually i'm on my own and if there is someone to help then they have 0 experience.I dont really want to use the auto take off feature.What i currently…
