"The problem was solved today, with a new and final crash... This time the plane was flying ok until I changed the flight mode to "manual" (something that I did not experimented in the last 30 or 40 flights), the plane entered in a sharp nose dive…"
My guess is a structural fault too, but I don't see any evidence of that. I can post some pictures of the crashed airframe, but seems that all broken parts was due the ground impact.
The tlog shows a lot of data when you load the log on…"
Hi,In the last 3 weeks my Skywalker flew about 600km's splitted in 40 different missions. In the last mission when the plane finished the last waypoint and entered in RTL, the plane did a very tight turn with nose down until crash on…
Hi,I have a Octo with APM2.6, ArduCopter V3.2.1 , MK3638 motors and 30A Afro esc's (Simonk). This setup won't fly. The last 2 flights resulted in flip and crash (after a few minutes in the air flying ok).Today, in the first flight one motor stopped…
Hi,In the old versions of Mission Planner we had the Start HIL Simulation, now I see the SITL Simulation in the Simulation Tab. That option is working?Why I don't find documentation about this method to launch the SITL? (I found just info about…
"A few days a go, I was like crazy trying to found a solution for a alt hold issue in my new hex and asking help to every body. After some tweaking with accel pid's I felt comfortable to go with Auto Tune.
I just can say... WOW! Impressive! My hex…"
"Hi, me again... Until asking some help for my AltHold issue. I loaded 3 different firmwares and the behavior is the same, so this is not a bug (like you should already know) in the 3.1. Now I'm with 3.0.1 , raised the THR_MID from 500 to 600 and I…"
"Sorry guys, I don't want be boring or abusive but I had no response from my last post with dataflash log (post in page 39, maybe forgotten because that),I'm desperate with this Alt Hold issue, I think that my vibrations are acceptable (you can…"
"Hi guys, AltHold motors pulsing problem in my hexa :(
My baro is covered with foam and my vibrations are under control (I guess...), but with default pid's when I engage the Alt Hold the copter starts to make small pulses on motors and sometimes…"
"Flip over to the right and crash on takeoff
After many successful flights (just one weird issue of motors stopped in air 2 weeks a go) , today I was trimming the Hexa in garage with auto trim mode, and after that the hexa flew like a charm, no…"