"I had a problem with changing of PWM value to set different flight modes. As I toggled my three position switch which is already set to channel 5 nothing was happend. The problem was solved by connecting of receiver (I have FS-iA6) output channel 5…"
"I had a problem with changing of PWM value to set different flight modes. As I toggled my three position switch which is already set to channel 5 nothing was happend. The problem was solved by connecting of receiver (I have FS-iA6) output channel 5…"
"Hi Amulya! I have the same problem with my APM 2,8 board and Flisky-i6 transmitter. Have you solved the problem? Amulya Agarwal said:
I am using mission planner 1.3.44. There is no MNT: MODE_CH that I can find. Which version are you using @Darren…"
"Hey Clifton! Thank you for that idea with connection of receiver channel 6 and board channel 5. I did can not change PWM value on channel 5 to get different flight modes. So after I've read your message I've tried to connect channel 5 on my receiver…"
"Hi Amulya! I have the same problem with my APM 2,8 board and Flisky-i6 transmitter. Have you solved the problem? Amulya Agarwal said:
I am using mission planner 1.3.44. There is no MNT: MODE_CH that I can find. Which version are you using @Darren…"