Gender
Male
About
Location
Phuket
Please tell us a bit about your UAV interest
Enthusiastic amateur
Hometown:
Phuket
Activity Feed
"Hi Guys, having a few newbie issues getting my drone to arm....exactly the same symptoms as Kevin mentions above....
At least now I'm getting a connection and have been able to install firmware however i can not get the mandatory hardware tab up? Im…"
At least now I'm getting a connection and have been able to install firmware however i can not get the mandatory hardware tab up? Im…"
"Hi Jonny,
Watching your post with interest as I have exactly the same problem.
I did have a few issues getting the APM to connect with planner 2.0...with a mac..I eventually managed this and was able to install firmware...but thats about it.
I would…"
Watching your post with interest as I have exactly the same problem.
I did have a few issues getting the APM to connect with planner 2.0...with a mac..I eventually managed this and was able to install firmware...but thats about it.
I would…"
"Hi Eric,
This would suit me very well, Ive always had an interest in RC helis etc however my Son has taken a real shine to drone flying...and i want to encorage him while ever he is keen.
I recently purchased a kit as you describe from eBay and Im…"
This would suit me very well, Ive always had an interest in RC helis etc however my Son has taken a real shine to drone flying...and i want to encorage him while ever he is keen.
I recently purchased a kit as you describe from eBay and Im…"
"Thanks very much Chris.
I'll try another cable tomorrow.....However I feel the later maybe closer to the point.
I did manage to get the Com port to recognise additional options beside the bluetooth connection...do either option starting with…"
I'll try another cable tomorrow.....However I feel the later maybe closer to the point.
I did manage to get the Com port to recognise additional options beside the bluetooth connection...do either option starting with…"
Hi All,I see this issue has been posted many times....However I post in the hope that someone actually found the answer....Please forgive a rank amateur ...First go.Assembled my quad copter yesterday...basics achieved eventually...Using an Ardupilot…
