"HI Jani, I bought APM 2.5 with GPS uBlox NEO 6 from Jdrones store. Unfortunately, until now, the GPS can not working properly. Sometime the position is fixed and sometime is not fixed. I have 6 units of GPS uBlox NEO 6 and all have same problem.…"
"Markus, Great!!! My wife and I are doing a research about unmanned vessel system for hydrographic survey. I have tried ardupilot for the boat. I still can not configure the ardupilot for boat especially for auto mode. This is my…"
Dear Friends,I 've just buy 3 units of ardupilot mega 2.5 from the reseller in Singapore. I've try the units using my skysurfer. The problem is when auto mode, the flight can not go to the waypoint / home. I checked on the ground, and I saw the GPS…
Dear Friends,I have a question about ardupilot telemetry baud rate. By default, the baud rate is 57600 and I used it several times in my easystar. After I move the ardupilot system into Maja and the current come from regulator, I can't connect the…
Hi,today I try arduplane 2.6. Manual and stabilize mode ok. When I try in auto mode, aileron and elevator can not control manually. Rudder still can. Throttle still control manual (not connect to Arduplane hw).Do you have suggestion?regardsDeni
How to display Waypoints mission planing in HK? I've just only see the actual path from Ardupilot Mega via Xbee communication to my laptop. I can not compare the actual path and the mission planning Regards Deni
Dear Friends,I have a problem when setup ArduPilot.When the mode is moved to stabilize or fly by wire A, the throttle is always spinning fast and can not be controlled. I try to do debug in mode 8 (from Jason), and I see the value of Throttle always…