Gender
Male
About
Location
Redmond, WA
Please tell us a bit about your UAV interest
ArduPlane
Hometown:
Redmond, WA
Activity Feed
"iOS will only support WiFi connections since iOs requires anything connected to it to be licences. Hence you can't connect an SiK radio to an iPhone."
"Put the details into a GitHub Issue: https://github.com/mavlink/qgroundcontrol/issues. And we can work on figuring out what is going wrong there."
"Sorry not currently supported."
"Best place for QGC support forums are documented here: http://qgroundcontrol.com/#resources. That said the best way to build QGC on Windows is with Qt Creator no Visual Studio IDE. Also VS 2015 is needed not 2010."
"Best thing is to move this discussion to here: http://discuss.px4.io/c/qgroundcontrol. And then also specify at a high level what you are trying to customize."
"The internal compasses on a PixRacer can be a pain. If the quality is bad you need to turn one or more of them off usually. If you use QGroundControl to do onboard compass calibration at the end you will be shown a quality report for each compass.…"
"The ArduSub usage of QGC is an interesting capability that we don't talk much about. QGroundControl has a plug-in architecture which allows third parties to customize the UI and internals of QGC to support custom vehicles. ArduSub is an example of…"
"Internet search on "nouveau OpenGL crash" seems to show a high count of issues. I'd try a different driver."
"@andreas My guess is a problem with the video driver. Linux tends to be very stable since there are so many users on it. Video Driver OpenGL support can be flaky which in turn causes problems with ui crashing."
"Here are the docs for how to use the Plan view: https://donlakeflyer.gitbooks.io/qgroundcontrol-user-guide/content/.... Click the Add tool (+) to add waypoints to the map. Then click the command name (Waypoint) to change the command to something…"
We are happy to announce the release of QGroundControl 3.0. QGroundControl provides full flight control, mission planning and configuration for ArduPilot or PX4 Pro powered vehicles. It is available for Windows, Linux, OS X, as well as Android…
"New Daily builds are posted: http://www.qgroundcontrol.org/downloads. Note that you need to run PX4 firmware master build as well since it has changes for those parameters. Stable PX4 firmware has them set to -1 which doesn't allow you to recalc…"
""Can I use my external, on-board voltmeter, seen in the pix of my battery, to measure voltage for the calculator?"
I would think so. You then type that value into the calculator, Hit Calculate and it will set the new value of the BAT_V_DIV…"
I would think so. You then type that value into the calculator, Hit Calculate and it will set the new value of the BAT_V_DIV…"
"This screen is missing two key parameters which are used to adjust things:
BAT_V_DIV - Voltage divider you can adjust if voltage isn't reading correctly
BAT_A_PER_V - Amps per volt value you adjust if current isn't reading correctly
Both of these…"
BAT_V_DIV - Voltage divider you can adjust if voltage isn't reading correctly
BAT_A_PER_V - Amps per volt value you adjust if current isn't reading correctly
Both of these…"
"If you wait two days, then flash PX4 developer build and download the latest QGC daily build. Then under Power you should see support for voltage and current calculators which allow you to calibrate the power module. The work for this is complete,…"
