Gender
Male
About
About Me:
I'm 20 years old, and currently a Mechanical Engineering student.
Please tell us a bit about your UAV interest
I would like to build a UAV with the ArduMega.
Hometown:
Brunssum
Activity Feed
Hello everyone,I have connected a Tarot T-2D gimbal to Windows 10. Since I could not find anything about it, I thought to post the pinout, mostly so I do not forget it.So the problem is that the standard usb adapter delivered with the Tarot T-2D…
"That's why I would expect the problem to be fixed on the manufacturer's end. A simple reboot fixes the problem, which means it's 100% a firmware issue. "
"Meanwhile the v2 is still absolutely useless. A sensor that "sometimes" adds 13m is not in any way flight capable. I would never every buy a lidar lite again even though it is Garmin now."
"I also have this problem. What works is logging in via NSH and rebooting the px4flow driver:
-Use mission planner
-Enable advanced mode, then click the Terminal tab
-Select NSH
-Connect
-Type "px4flow start"
-px4flow status (or was it info) should…"
-Use mission planner
-Enable advanced mode, then click the Terminal tab
-Select NSH
-Connect
-Type "px4flow start"
-px4flow status (or was it info) should…"
"We've still got some room on the quad, so that sounds good. Then we can compare it with both sonar and the lite.
I'll contact you via PM to explain our project a bit more."
I'll contact you via PM to explain our project a bit more."
"We're doing a project where we would like to follow LED beacons in a parking garage, so we're going to be pretty much between 1 and 2m altitude all the time.
Are there any plans to incorporate sonar backup for the lidar? If nobody is working on that…"
Are there any plans to incorporate sonar backup for the lidar? If nobody is working on that…"
"Thanks, going to give that a try next time. Currently we're still hampered a bit due to the Lidar Lite jumping to 12m occasionally, we moved it to its own BEC, but now it just up and quits sometimes.
I've ordered some stuff (Traco TSR 1-2450) for a…"
I've ordered some stuff (Traco TSR 1-2450) for a…"
"Very nice that there is a thread for the PX4Flow, and thanks to all the developers for their hard work.
Below is a video where we take off to 1.5m, turn 180 degree, then command a 1m move via Dronekit. After reaching 1m, it lands.…"
Below is a video where we take off to 1.5m, turn 180 degree, then command a 1m move via Dronekit. After reaching 1m, it lands.…"
"Hey Randy,
I've been testing the V2 via PWM connected to the Pixhawk (using master branch). I also see the jump, often to 12.02m. I also see the PX4Flow Sonar jumping to 12.02m.
Did you guys also see the jump via I2C, or only via PWM?"
I've been testing the V2 via PWM connected to the Pixhawk (using master branch). I also see the jump, often to 12.02m. I also see the PX4Flow Sonar jumping to 12.02m.
Did you guys also see the jump via I2C, or only via PWM?"
Dear all,I am testing the PX4flow together with Pixhawk, and it seems to require 3D Fix before arming in Loiter, even though EKF_GPS_TYPE = 3 and geofencing is disabled.Could this be a new bug due to the new feature of not being able to disable GPS…
"I have a similar question.
During the attached flight, the copter suddenly landed during alt hold mode. It's not exactly visible on the graph, but I landed the copter manually and only then switched to stabilise mode at the end. You can see SAlt…"
During the attached flight, the copter suddenly landed during alt hold mode. It's not exactly visible on the graph, but I landed the copter manually and only then switched to stabilise mode at the end. You can see SAlt…"
"Thanks for the tip, I've switched to an STM32F4, that fixed the problem."
"I believe the big problem you run into with 3 axis is having to re-mount the work piece, if you want to make a gearbox for example.
5-axis which only move when the spindle does not make contact with the workpiece is relatively easy to program and…"
5-axis which only move when the spindle does not make contact with the workpiece is relatively easy to program and…"
"Hey, I'm trying to replicate this in Arducopter. The strange thing is I get wildly varying times in between flow messages, sometimes they come at 0.01 second difference, but other times the time difference skyrockets to half a second.
In…"
In…"
"Dang, just missed the discount. Sent some feedback to the email address though :)"
"Thanks for the wind estimation info, now I'll go and see what I can get working myself. Good to hear it has since been thoroughly tested!"
