Hi everyone, My pixhawk configured for hexacopter gets lost at waypoint 5 in survey missions. It will stop traveling and start changing altitude down and then up again before i take over the controls. It has happened twice now and has not completed a
Read more…When building the y6 with upgraded motors, 35a esc using the px4 do the individual esc's need a bec on each?
Read more…I'm building a y6 with upgraded motor and esc. I've purchased the castle creations 4 pack 35amp esc, times 2 packs, designed for a quad. Only one has a 7a bec. When I'm building a multi rotor using the 3dr y6 power distribution board and the px4 auto
Read more…I experienced some trouble in loiter then guided mode today. I'm using the px4 and when u switch to loiter u can use the guided flight mode from there. When I right clicked and selected a fly to here position on the map the altitude option came up an
Read more…Has anyone out there experimented or experienced with two video transmitters on one uav? I'm thinking putting 2.4ghz and a 1.2ghz transmitter on my airplane. One will have a zoom cam with pan and tilt and the other will display my apm telemetry and b
Read more…Hi all, I've went thru the steps of updating the firmware and charset on my minim osd. After reading and banging my head on the table I've managed to get the osd to display telemetry, just the way I've set it up too!, haha it is glitchy (in and out)
Read more…Hi, I recently built a quad flys super nice in stabilize mode when I switch to loiter mode the quad will hold steady for a second or two then begins to fly around the loiter point increasing in speed around the point. I've tweaked the loiter pids and
Read more…Hi all, I opened up mission planner this evening and an update was found and so I downloaded it and a window popped up telling me the program has stopped working and windows will look for a solution then the next window pops up and says "a problem ca
Read more…