As i wrote in other threads, i power my em-406 gps module from a arduino data-pin.The gps module runns well, most of my code is written.I just started installing all of my hardware into my UAV_Eins airplane/drone.Shortly after "power-on" i found…
"By thee way: I am still testing without any aurduino/ardupilot. The airframe (plane itself + FMA-copilot) needs good flight characteristics!! This is more a fma-copilot issue than a UAV problem.
If i apply rudder, i want a constant yaw rate. Any…"
my plane shows the same behavior. I think the problem is the yawing moment of the ailerons. The rudder turns the plane, and results in a bank angle. The co-pilot tries to steer the airplane back to level flight. Due to the…"
"if you keep the nose up at 6m to touchdown on a easyglider you should have a nice landing.
there should be some groundeffect to, that reduces vertical speed a bit.
currently i land my "uav" from a height of about 20meters without any control input.…"
"If you are using the easyglider i dont think you will need the rangefinder.
just keep the plane level or sligtly nose-up, kill the engine and wait..."
As i postet here, i lost my UAV_Eins (one) due to "environmental effects".As i christmas wonder, i got a message that it has be spotet in a bush a couple of kilometers away from the airfield it was lost...Today (about 5months later!) i got it…