Gender
Male
About
Location
Alberta
About Me:
Rc/ uav nut
Please tell us a bit about your UAV interest
Always been intersted in uav's
Hometown:
Coaldale Alberta
Activity Feed
"I don't see the file"
"I use it on my apm2.5 and it works perfect. I got mine from hobbyking. I just uploaded the 3dr firmware and its plug and play. Here is my video http://youtu.be/_hx5k1ohHx8"
Hey i was wonding if any of you guys out there would be willing to help me figure out why i cant compile this code or how to do it.i want to make a brushless gimbal and theres this german guy that wrote the code but i cant figure it out and cant…
"What are you trying to do with this cable?
Just get power from the apm or something else"
Just get power from the apm or something else"
"Hey randy
I just found out that my compass is no good. Cli says compass not healthy.
Will I still be able to run 2.9.1 or is there any way to fix this?
Thanks"
I just found out that my compass is no good. Cli says compass not healthy.
Will I still be able to run 2.9.1 or is there any way to fix this?
Thanks"
"So I'm trying to tune my alt hold because it just wants to land when I switch to alt hold.
So here is what I did
Vib dampening
Accl calibration
Turned the-mid down to 350
So after I turned it down to 350 it stays airborne but ossilates up and down a…"
So here is what I did
Vib dampening
Accl calibration
Turned the-mid down to 350
So after I turned it down to 350 it stays airborne but ossilates up and down a…"
"I need help. I can get as far as the power flash then I get "no com port detected". I did EEPROM clear and power cycle tryed the jumper nothing works"
"Thanks a bunch for this guide couldn't have done it without it"
"Reason your throttle is not working is because your plane must be moving, throttle will not arm in auto mode when standing still. Hope this helps"
