Gender
Male
About
Location
SA
About Me:
Avionics Tech
Please tell us a bit about your UAV interest
Building a quad based on APM
Hometown:
Adelaide
Activity Feed
"Correct, probably not premeditated, greed tends to creep up. My views have been tarnished from having been in an environment filled with egotistical megalomaniacs for 25yrs before escaping to a much friendlier industry. I tend to become very…"
"@Ernst. What was expected, when a guy quits a high-end job
Couldn't agree more, I knew something was up back when it happened. There was just so much effort being put into getting everyone else to contribute, it reminded me of the basic principals…"
Couldn't agree more, I knew something was up back when it happened. There was just so much effort being put into getting everyone else to contribute, it reminded me of the basic principals…"
"Your antennas need to be either both vertical or horizontal, any misalignment drastically reduces the range. also note that if they were to be both at, say, 75 degrees, this only works outbound as when the vehicle turns 180, there is now a 30…"
"This is a very timely blog. Thanks Doug, for making me do a triple check.
I was going to test this today for the first time ever in 6 years of drones.
Last night I was going through the motions as my Futaba 12fg also does the switch and throttle…"
I was going to test this today for the first time ever in 6 years of drones.
Last night I was going through the motions as my Futaba 12fg also does the switch and throttle…"
"Hi Gary,
I am quite aware of all the various uses for our "flight controller". Just because I post very rarely, does not automatically make me an ignorant newb or someone with nothing worthwhile to contribute.
I wrote the 3 first instructional blogs…"
I am quite aware of all the various uses for our "flight controller". Just because I post very rarely, does not automatically make me an ignorant newb or someone with nothing worthwhile to contribute.
I wrote the 3 first instructional blogs…"
"Isn't this diy DRONES. Sorry, not seeing much correlation."
"This is available now on goodluckbuy here"
"Victor I'm very impressed. Only a few of us voiced our concerns and you have resonded in a very positive manner.
Backed for 2 early birds."
Backed for 2 early birds."
"+1 for Gary. It's not just the price. 55 euro freight to Australia is insane for a cape. That works out to over AUD$350 landed at my door. I have 2 BBB's gather dust since Feb 2014. When I first saw the price, it looked to me like the price was not…"
"Hi Rob,
Just wondering if you've done a TT vs Belt drive vibe comparison."
Just wondering if you've done a TT vs Belt drive vibe comparison."
"That just put a picture in my head.
Anybody remember the Thunderbirds episode where the plane lands on the 3 recovery vehicles, 1 master and 2 slaves."
Anybody remember the Thunderbirds episode where the plane lands on the 3 recovery vehicles, 1 master and 2 slaves."
"That's brilliant, a launch dolly that comes home by itself. What a great tool for a club to own.
Well done lads."
Well done lads."
"First off great job Dev's.
I haven't flown since 2.6, been slowly building a HK Talon Hex, so was eager to try 2.8.1. I think a bug has crept in somewhere between these two versions. My esc's won't arm with 2.8.1 unless I either boot from usb or a…"
I haven't flown since 2.6, been slowly building a HK Talon Hex, so was eager to try 2.8.1. I think a bug has crept in somewhere between these two versions. My esc's won't arm with 2.8.1 unless I either boot from usb or a…"
"Would it be possible to add check boxes to MP to do a selective save? Also 2 extra boxes for "All" & "None"."
"This question was posted by Mike back on page 3 and doesn't seem to have been answered.
"Where can I find more information about the "support for the new features in the new MTK GPS firmware" new feature?"
Is this just 1.6 or is there a newer…"
"Where can I find more information about the "support for the new features in the new MTK GPS firmware" new feature?"
Is this just 1.6 or is there a newer…"
"Darren that is how it is supposed to work. It is a limitation of the 9x firmware that we have to waste a channel in order to get the 6 positions. Now you have an excuse to upgrade to er9x and claim back that wasted channel."
