I think the unique think of the BeagleBone Blue is that it is single board solution for this small price. Technically the advantage of using the firmware I have written for the PRUs of the BeagleBone (internal PWM generation) is, that you…"
Beagleboard.org has released the BeagleBone Blue some days ago, a Linux-enabled computer for robotic applications.The BeagleBone Blue is an open hardware platform that include a large array of sensors and IO; IMU, Baro, PPM for RC input, 8 channels…
Hi all,I would be happy when we switch to discuss.ardupilot.org for further BBBmini related support issues. For the topic we should use BBBmini: topic in the linux-autopilots section until there is no BBBmini section now. I think there the topics…
"You can use the SD card as file system as well, you have to change the last line from /boot/uEnv.txt from
"Just found a A5A BBB with 2GB, same issue here. I have to talk to robert about that.
Justin C said:
During the Flash the lights go from D2-D5 and back again few a few minutes, they the system shuts down. When attempting to boot D2 and D3 light and…"
"I tested it successful with a FrSky USB adapter connected to the BBB USB port. You could also connect the FrSky receiver to an uart port of the BBB, but you have to take care of the 3.3V and you may need a signal inverter.