Gender
Male
About
Location
Orinda, CA
Hometown:
Orinda
Activity Feed
"Bill - i will try to fly the plane using CH4 and when i do, i'll let you know what happens. jay"
"Taylor - it worked! thanks so much. It's probably in the Futaba manual somewhere, but i couldn't find it. By the way, I know you responded to a few of my posts yesterday about not getting the throttle to work through the ArduPilot. To see if I had…"
I am having trouble setting up my Futaba 7c with failsafe. I am trying to follow the instructions here: http://code.google.com/p/ardupilot/wiki/RadioSetup but it can only seem to change one of the settings. For example, it says i'm supposed to…
I set up my ArduPilot and I am ready to load everything up into my EasyStar, however I can't seem to get the throttle to work when I hook it up through the ArduPilot. I get no response. My servos respond without a problem. I am using the Futaba 7C…
I am working on my ardupilot and I am currently trying to fit the servos I purchased into my Easystar. I bought the servos recommended http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDEL5&P=0... they seem quite big for the slot already cut out…
I purchased the recommended Xbee modules and USB adapter board. I also downloaded Digi's X-CTU utility. However, when i run the utility, the utility communicates with the Xbee properly, but it does not recognize the modem type. it says…
