About

Gender

Male


Location

Palm Bay, FL


About Me:

I enjoy spending time with my family and my dogs. I like to play golf and just about any other sport. I like the outdoors and Florida weather.


Please tell us a bit about your UAV interest

I've been an aviation enthusiast since I can remember my grandfather who built homebuilt experimental aircraft on his farm. I got my private pilot license when I was 17 years old and recieved a Bachelor of Science in Aerospace Engineering from Embry-Riddle Aeronautical University. I'm currently a systems engineer designing commercial navigation radios for an avionics company and I have a few RC planes I would like to convert into fully autonomous UAV's (just for the fun of it).


Activity Feed

Jeremy commented on Chris Anderson's blog post Details on how Iran may have used a GPS override spoof to capture US drone
"As a GNSS receiver designer (GNSS includes GPS, GLONASS, GALILEO, and all the other future constellations). I can tell you that they 99.999% did not spoof the GPS M-Code signals (spoofing civilian signals is easy that’s why the military doesn’t use…"
Dec 16, 2011
Jeremy commented on Chris Anderson's blog post Restarting the T3 Contest: Now with copters!
"Jason, were you flying in + or x configuration? Also were you using sonar or baro for altitude?"
Dec 15, 2011
Jeremy commented on Chris Anderson's blog post Restarting the T3 Contest: Now with copters!
"Gary, you have my original time. My fastest run (page 10) was 1:43 or 103s."
Dec 13, 2011
Jeremy commented on Chris Anderson's blog post Restarting the T3 Contest: Now with copters!
"Here's my final copter entry and update to my original entry on page 7.
Time: 1:43
Aircraft: ArduCopter with APM
Log File

Same waypoints as in my original submittion. This was with 2.0.55, + configuration, no sonar, and I modified the Nav_WP PIDs…"
Dec 11, 2011
Jeremy posted a discussion
I recently installed the latest Mission Planner and loaded ArduCopter 2.0.50 Beta Quad. Did all the usual setup and saved all my modes (When I toggled my mode switches on my transmitter, the highlighted mode switched through all 6 of them so my…
Dec 1, 2011
Jeremy commented on Chris Anderson's blog post Restarting the T3 Contest: Now with copters!
"@Chris - I was running ArduCopter 2.0.40, + configuration (yes I know I have the battery mounted in the x config), all default PIDs, no Sonar (that's what I will be purchasing with any winnings :-) )
@William - Losing communication with the ground…"
Nov 28, 2011
Jeremy commented on Chris Anderson's blog post Restarting the T3 Contest: Now with copters!
"My first ever "Auto" mode flight, also my first T3 entry, and possible the first copter entry:
Time: 2:51
Aircraft: ArduCopter with APM

I'm hoping someone can help me figure out what happened between WP2 and WP3, looks like it lost GPS lock or…"
Nov 27, 2011
Jeremy posted a discussion
How can I tell the position / time of points along my flightpath by looking at the logged data?I have converted the log to KMZ and opened it in Google Earth but still cannot seem to tell the lat/long/time at any specific point.Also, can't make…
Nov 26, 2011
Jeremy commented on Chris Anderson's blog post Awesome manned electric multicopter takes off, crashes
"What did the neighbors think when you rolled that out of the garage? I get strange looks when flying AC2 in the driveway."
Aug 27, 2011
Jeremy posted a discussion
Hello all, I'm new to electric motors and I've read lots of horror stories about charging LiPO's, so excuse the noob question. I just received my ZIPPY Flightmax 2200mAh 3S1P 30C LiPO and IMAX B6-AC charger for my quad but none of the connectors…
Aug 3, 2011