"I just discovered this now. absolutely great information. but how can i find out what motor and prop to use? Most usual motors have suggested props up to 17", but even on a "small" frame you could mount larger props?"
"...as mentioned in my problem, yes I used RC (not SB). The FrsKy S.bus to PPM converter works, a sign that there is a a good s.bus signal. is there anything to set in the Pixhawk to accept s.bus or should the switch (or interpretation) of s.bus and…"
"I try to use a FrSky X8R in mode 4 on s.bus, but whatever way I try (and correctly connect to RC) it does not talk to the Pixhawk. If I use the Frsky S.bus to PPM it works fine (which at least proves that the X8R has good s.bus signal, and that the…"
"Thanks craig,
As mentioned in my original post, i have connected the x8r mode 4 to the RC port... But no talking... I have no esc connected, just a pixhawk, gps on my desk.....
What does this 3000 mean in channel value as max is supposed to be…"
"Hi,
Seems as if I am in a similar situation. A Taranis with an X8R in mode 4 connected to the RC port of the pixhawk. Everything is recognized perfectly in in MP, except that I cannot calibrate the Radio, it seems as if no signals go over the s-bus…"
"hi, funnily I have the exact same setup (X8R, mode 4 connected to RC, Taranis in D16 using Ch1-CH8) and I have no communication at all with the Pixhawk (RX is binbded to the Taranis, and X8R works fine when connected to a Naza). For the moment I…"