Roma Drone Conference, which starts today, is the first of a series of UAV related conferences that will be held in Rome to discuss about many UAV aspects like safety, privacy, rulemaking, tecnology development related to "Drone Journalism". One of…
i've successfully armed my escs after a radio calibration (lowering throttle values in the tx). I've still many issues to face: quad is acting like crazy in stabilize mode and even worse in althold (non flyable). It seems to loose horizon.…"
sorry guys, i have two major problems:
1) is it possible that there's not a "search" function into this thread? How can find any solution just browsing 70+ pages all around?
2) i cannot arm my CC phoenix 25A equipped quad with an apm 2.5…"
Here some backstage details of last episode of "60 minutes", a popular tv show focused on the most relevant news around the world. This episode focuses on the biggest ship accident of modern era, the Costa Concordia sinking.Starting from 1:40 of the…
Here is a fresh news from Italy, a drone startup called ItalDron, located in Ravenna (Italy), helped police forces to unveil a undercovered marijuana farm near the town. It's the same company which provided AP coverage during last May' central Italy…
"the two upper pots.
You can route two of any of the three pots avaiable, i think there's no difference.
Small joystick from sparkfun is cool and small, but i could not sort how to cable it to the 9x, although i'm no master in electronics.
"It recenters. if you look carefully, there's a switch next to the upper pot. With that, you choose to use the two pots to move cam axis in a "fixed" no-recentering way or move with the joystick with recentering. You must do zero position with…"
"i had similar issues, then realized i had motor connectors swapped or wrong places (eg. motor 2 in place of 4 etc) .
Set the right order, my quad went fine with all default pids etc.
check carefully motor esc connectors order, then do a "hands on"…"
"joints between tube and center part and motor mounts will not work. You will need some clamps to pinch tubes, otherwise they will fail under scews pression. Motor mounts could rotate in flight if tube fail, with distastrous consequences. The good…"