Gender
Female
About
Location
Manila
About Me:
I'm currently doing our thesis about ArduCopter for Traditional Heli. I'm working with Jonathan Diaz, Nicole Marcelo and Crissangelo Pagal.
Please tell us a bit about your UAV interest
For thesis purposes. using the following specs: 1x Futaba s9257 digital servo (Tail servo) 40amps hobbywing Platinum ESC Hobbywing 8amps UBEC Turnigy 8x receiver Copter X 450 KDS 800 gyro(to be replaced w/ Futaba gy401) HMC5843 magnetometer GS407 U-Blox5 GPS
Hometown:
Manila
Activity Feed
"Hi! Any news with the arducopter? Left our heli at school for the display so we cant do some testing yet. "
"I have a problem with the current code from the GIT. The collective, pitch and roll of our heli is limited but when in CLI the movement is okay. Any ideas?"
How would you know that your IMU is busted? We sometimes have a wrong readings for the attitude of the helicopter. Do we have a software to test if the IMU has a problem?
"Hi! When this is done, would that also affect the inputs of the RC?
When the APM does not have an output, what steps do we need to do to revive it?"
When the APM does not have an output, what steps do we need to do to revive it?"
"Anyone tested .49? We have a problem with the yaw. The heli spins. We saw that the yaw doesn't compensate when in flight mode but then in CLI the yaw seems to be working. Inshort, the motors is in reversed mode. Any idea?
we are using gy401, with…"
we are using gy401, with…"
I'd like to change the longitude and latitude values shown in the HKGCS to decimal point only. How do I do that?
Hi! I just bought a camera, (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=...), unfortunately I thought that the video will be received by the xbee so that it will be read by the GCS.So now, we have to buy USB Capture Card,…
"Has anyone tried the latest code? We wanted to try it for stabilize and loiter. Hopefully with navigation. Would there be a problem in flying the latest code with waypoints?"
"Is the xbee rpsma 900hz is sensitive? We already have two xbee broken. :("
"Here's our graph during the last flight. the sonar looks good but the barometer is not right. sonar-baro.jpg"
We still dont have the same result from the sonar and barometer. Also, we tried testing the sonar via getting the signal from the sonar using the oscilliscope and comparing the result to the actual distance but the result is different?
Anyone tested on the new code?
"how do you test the accuracy of the sonars?"
"I edited my post. Maybe you got confused with my previous post. The first video has two power source. We saw the movement of the swashplate which is really bad so we connected it to the mission planner, thus the second video. After that, we tried…"
Hi guys! We have an update with all the problem that we had last time. We tried all the possible connections for our heli before our test flight again. Here are the videos. http://www.youtube.com/watch?v=6_AcxHYsHUU -> power supply for servo&engine…
