About Me:

Interested to everything flies.

Please tell us a bit about your UAV interest

Arducopter and aerial photography

Activity Feed

Mario replied to Randy's discussion ArduCopter 2.6 released!
"Hi people, I tried to use the tilt and roll stabilization. The roll function very smooth, but the pitch doesn't work. When I try to move the copter, the pitch servo respond with random movement, same behaviour using the ch6 pot.
The problem isn't in…"
Jul 7, 2012
Mario replied to Randy's discussion ArduCopter 2.6 released!
"Good morning to everyone.
I've just checked the verision 2.6 but I have some problem with the PID.
In the past I flown 2.45 with a lighter hexa without problem, now I've replace the motor and esc increasing the weight and the motor to motor…"
Jun 24, 2012
Mario replied to Jason Short's discussion Arducopter 2.0.50
"Hi to everyone,I need to fly tomorrow using the stabilize mode but i'm worried about the APM freeze. I've the FW 2.50 loaded with GPS and magnetometer activated. To limit/avoid the possibility to freeze the APM I'd like to disable the magnetomter…"
Dec 3, 2011
Mario replied to Brezoescu Cosmin's discussion YAW problems
"Hi, probably you have a not perfect alignment of the structure, first of all try to check it.
For the radio setup, if i well remeber after the calibration all the stick must be put in the center, even if the yow stick is self centering.
Oct 29, 2011
Mario replied to Mario's discussion Loiter and altitude hold vertical oscillation
"Yesterday I setup the APM_Config.h to perform the in flight tuning of throttle_P. I'd lik to have a log of mode and to abtain that I activate the MODE log on the APM_Config.h but without success. 
In the CLI setup, in the list of the enabled log…"
Sep 21, 2011
Mario posted a discussion
Hi to every one.I’ve build my first arducpoter, an hexa, with APM (1280) and IMU shield oil pan revH, GPS andmagnetometer. I’ve download on it the FW 2.42, it flies very well in stabilized with the stock PID.I’ve issue in altitude hold and in…
Sep 19, 2011