Gender
Male
About
Location
RE
Please tell us a bit about your UAV interest
my first project is to install APM 2.6 on a Phantom, after this I will build an Hexa with a Pixhawk
Hometown:
Vezzano sul Crostolo
Activity Feed
"Thanks Randy for your quick answer and for the great job that you and the others developers are doing!"
"Hi Randy, is it possible to enable in Arducopter polygon Geofence, the same way it works in arduplane?
If not do you think this could be possible in the future?
Thanks
Massimo"
If not do you think this could be possible in the future?
Thanks
Massimo"
"I totally agree with you! "
"Thanks Paul!
I read here : http://www.rcgroups.com/forums/showthread.php?t=2274401 "There is a bug in Arducopter 3.2 that might affect you if you are using pixhawk or a compatible that has two telem ports. If you use the second telem port (telem2)…"
I read here : http://www.rcgroups.com/forums/showthread.php?t=2274401 "There is a bug in Arducopter 3.2 that might affect you if you are using pixhawk or a compatible that has two telem ports. If you use the second telem port (telem2)…"
"I am using Wolke's code.
I am struggling with the SR set up.... I have all the data on telemetry but it's quite sluggish. What is the official set up? I am using a pixhawk with arducopter 3.2.1 and the openTX Taranis plus 2.0.17 "
I am struggling with the SR set up.... I have all the data on telemetry but it's quite sluggish. What is the official set up? I am using a pixhawk with arducopter 3.2.1 and the openTX Taranis plus 2.0.17 "
I would like to use a TTX600 controller that came with RealFlight simulator and the USB dongle.When I select joystick set up in Mission Planner i can see the option RealFlight Interface but when I go to try the Autodetect it says "no valid option…
"I don't know why in the main page you can't exceed 0.250 but I found you can use the value you want without limits in the "Full Parameter List"."
"How did you guys exceed the limits? I would like to try an higher P than 0.250 but there is no chance to do it....
"
"
I'm working on my first quad but I am having some issues... the first flight was really bad, almost crash. Here you can find my log, I am trying to analyse it with APM planner 2.0.17 but all the information I can find on the log analysis talk about…
"Tomorrow I will try with the stock ESC... At the moment everything seems working fine. Did you David solved the ESC problem in any way?
Thanks a lot for the post, really helpful and well done!!
Massimo"
Thanks a lot for the post, really helpful and well done!!
Massimo"
"Did you guys had any problem with the ESC calibration?"
