Gender
Male
About
Location
San Pablo, CA
Please tell us a bit about your UAV interest
I have been flying RC models and building DIY builds since 2008, It is my absolute favorite thing to do.
Hometown:
San Pablo CA USA
Activity Feed
"I uploaded the .bin file that i just did in my garage if that is any help.2016-04-26 17-42-45.bin"
"It seems there is only one option in the list for FILT and that is INS_MPU6K_FILTER and it is already set to 98. I set it to 100 but no difference what so ever. "
"Thank You for the reply, I am trying this out rite now and will update with results. "
Hello all, Recently I have completed my 250 build and I am having trouble tuning it. I started with P, then I, and finally tuned D till I like the timing of it's response. And I have it flying well in stabilization and acro mode. It hovers in a 5…
"PPM is the wave or signal that comes from the tx to rx you would still map any channels threw your Radio in the channel mixer. think of it this way, you have a analog and a digital connection both accomplish the same thing but one is faster and more…"
Hello all, I have had this micro APM flight controller for about 6 months now, it is my first APM flight controller and it has been nothing but trouble for me. I can fly this multirotor with the APM FC in stabilize mode but it is very hard to keep…
"also straight forward wiring, all ESC only have signal going to FC, power is taped from battery for FC threw BEC. and just a split cable from bat to all ESC, tested with voltage meter all fine. servo powered from all three ESC power out in parallel."
"I was thinking the same thing, I have it in peaces at the moment, was gonna do a mini quad for the time being just to get more familiar with this FC, I also just remembered I had not updated the firmware on the ESC and they are new, so that might be…"
Hello guys, This is my first post here and I am hoping to find some help with an APM I bought. The specific model of APM I bought can be found here Micro HKPilot. So let me begin by saying this is my first APM build and am very dumbfounded about…
