hi all again :)i am getting a lot of servo jitter on my middle switch. i have them setup as #define POSITION_1 MANUAL #define POSITION_2 STABILIZE#define POSITION_3 FLY_BY_WIRE_Amanual is fine, rock solidi get a lot of constant jitter and twitch on…
another newbie question.i am getting the following lights on the boards;IMU solid orange, occasionally drop out then back solidSolid blue, again occasionaly drop out then back solid, GPS lock after a couple of minsno red but when i move the IMU…
i am trying to conduct the tests before i fly my skywalker.i have test flown my plane without any gear and have now just installed all the ardupilot.on the test page http://code.google.com/p/ardupilot/wiki/Testi have tried inputting 1 into my…
hello all, i am just setting up my ardupilot and i have some questions (maybe a dumb one)1) ardupilot takes the throttle, ailerons and elevator. is it possible to plug a rudder and pan and tilt direct to the receiver ?will this have an effect on the…
i wired it up and there is no picture coming out.i have wired it with white (video out) to yellow (video in) and yellow to white and i havetried crossing them like the wire diagram says and still nothing.i connected our dvd player to the 4" media…
hey, my friend is helping me setup up my Ardu gear for me. We are having a few teething problems. We programmed the Autopilot and I finally got it done with the 2.5.1 code. I'm still having trouble programming the IMU and can’t find any tutorial…
can i just order the kit anyway, i am in australia i can get a hold of servo extentions pretty easy at my local hobby shop unless they have to be some kind of special ones."
hi all i am currently trying to buy my first setup. i am trying to purchase the ArduPilot Shield V2 Kit, but when i add to cart it says the servo extentions are not in stock. but if you go to the cables/connectors tab they are availible. i tried…