Gender
Male
About
Location
Holton, KS
About Me:
Flying quads for 2 years
Please tell us a bit about your UAV interest
Using it for Aerial photography
Hometown:
Holton KS
Activity Feed
Are the DIP switches no longer used? Just wanted to clarify that they all should be up - Thanks Mike
Is it possible to fly my hexa in + mode with the mega software? All I see is the X option - ThanksMike
"Thanks Chris - I did not have anything connected and it was still doing it just sitting here
Thanks
Mike"
Thanks
Mike"
"Mine was no Mag error - It did exactly the same thing with a brand new mag - One was a sparkfun one was a DIY - One did exactly the same thing on 2 different APM's as well- Has to be the oilpan or a faulty new mag - But this board is also a foxtrap…"
"Thanks randy - That was my triple check - I reheated all the pins on the oilpan - twice to make sure - Weird thing is I have been flying this for months with no issues -
Mike"
Mike"
"Thanks Randy - I triple checked all solder joints and still no go - I have to touch that pin in order to get the green light on the oilpan - Thanks
Mike"
Mike"
"Thanks guys - What I am finding even when I move the mag around not mounted - it still is saying -2048 on the z - I think my oilpan is toast - Now the green light isnt even coming on the oilpan - Not sure what direction to go now -
Mike"
Mike"
Okay - I am getting very frustrated here - I thought I was having trouble with my sparkfun magneto so I ordered a DIY - Only to have the same problem - Last flight I was unable to use CLI to determine my offsets - The last number always stays -2048…
"There is always this type of gear also - two different heights a gopro mount and battery tray - www.x468.com
I am currently using this style and is easy on off - They should have future camera mounts that work with it as well.
Mike"
I am currently using this style and is easy on off - They should have future camera mounts that work with it as well.
Mike"
"Is that kinda like "checks in the mail" - lol - Thanks Sebastian -
cdi3d"
cdi3d"
I thought I read somewhere that an update would be out shortly (2 weeks ago) - Any word on when this might happen? Looking forward to using all the sensors - I know the version in the truck has this but I can never get the trunk version to work…
"Thanks Sebastian - Are there any images of this setup? Are you saying nothing is connected to the middle pin?
Thanks
Mike"
Thanks
Mike"
"Is there a diagram of wiring the leds somewhere? Being that I am a total electrical noob -
Mike"
Mike"
"I have been there as I just fired an output on my MUX chip due to a cross plugging in of my esc with power on the signal input instead of signal - Might be handy if the MUX was a "plugin" style chip rather than a soldered on chip for such problems.…"
"Thanks Alex - I am going to try some RCtimer 2826 Series - Swinging a 12x3.8 prop - I shouldn't say heavy lifter but heavier lifter than most quads. I am looking to lift about 16-20 oz for camera and downlink gear - Not a lot of weight but more than…"
