I realise you posted this a long time ago but it's relevant to what I'm doing now. I recently acquired a LEA6T-0 chip (with the evaluation kit) and have managed to get coordinates to within 40cm of reference points with post processing…"
"We've been having a play with some video now and are having the same vibration problems as you. I think the problem might be in the gimbal mount. It's so small and close together that I think it induces a bit of low frequency wobble. Ours came with…"
Are you still having dramas? We've got this gimbal on board now and she seems to work nicely and stabilize pretty well.
Have you got your landing gear to retract? what settings are you using if so? not as straight forward as I was…"
I saw on some site talking about 3DR radios what all the light codes are. Solid red on them means a firmware related message. I figured it might be the same on this so updated the firmware using RFD modem tools…"
I'm having a few dramas with my RDF900 units. One seems to be good and I'm able to 'load settings' from Mission Planner and connect to the 'RFD Modem tools' software okay. This flashes the green light when connected to either my computer…"
"wow wel I wouldn't be surprised if that play in the landing gear is your problem. Mine has none, its firm when up and down. Theres a spring putting quite a bit of tension on, is yours a bit loose maybe? the mechanism for retraction together with the…"
"Just took my DJI S1000+ with pixhawk for its first successful flight and shes a beauty. Did a bit of an auto-tune. Had the landing gear down and no camera/gimbal attached. Will have to re tune when this is all on but I hope this helps people for…"